Elsayed Aziz

• PhD (2003) Stevens Institute of Technology (Mechanical Engineering)
• MS (1991) Mansoura University (Mechanical Engineering and Production)
• BS (1986) Mansoura University (Mechanical Engineering and Production)

• Design and Manufacturing Research Competency Test (RCT) Qualifying Exam Member
• SAE Baja Club at Stevens Chair
• Member of ME Undergraduate Lab Committee Member
• ME Faculty Search Committee Member
• Senior Design Panel Member Member
• ME PhD Qualifying Committee in Vibration Member
• ME UG Committee Member

• ASME/IMECE, FIE, ASEE, AGMA Reviewer

• AGMA – American Gear Manufacturers Association Member
• ASME – American Society of Mechanical Engineers Member
• ASEE – American Society of Engineering Education Member

Book

1. Zhang, Z.; Zhang, M.; Chang, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2018). Collaborative virtual laboratory environments with hardware in the loop. Cyber-Physical Laboratories in Engineering and Science Education (pp. 363-402).

Book Chapter

1. Zhang, Z.; Zhang, M.; Chang, Y.; Aziz, E. S.; Eshe, S.; Chassapis, C. (2018). Collaborative virtual laboratory environments with hardware in the loop. Cyber-Physical Laboratories in Engineering and Science Education (pp. 363-402).
2. Zhang, Z.; Aziz, E. S.; Esche, S.; Chassapis, C. (2018). A virtual proctor with biometric authentication for facilitating distance education. Lecture Notes in Networks and Systems (vol. 22, pp. 110-124).

Book Chapter, Book Series

1. Zhang, Z.; Aziz, E. S.; Esche, S.; Chassapis, C. (2018). A virtual proctor with biometric authentication for facilitating distance education. Lecture Notes in Networks and Systems (vol. 22, pp. 110-124).

Conference Proceeding

1. Elbahloul, M.; Aziz, E. S.; Chassapis, C. (2019). Hypocycloid Gear Mechanism versus Slider-Crank Mechanism in Engines. Anaheim, CA: Proceedings of the ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC/CIE2019.
2. ElBahloul, M. A.; Aziz, E. S.; Chassapis, C. (2019). Hypocycloid gear mechanism versus slider-crank mechanism in engines. Proceedings of the ASME Design Engineering Technical Conference (vol. 10).
3. ElBahloul, M. A.; Aziz, E. S.; Chassapis, C. (2019). Hypocycloid gear mechanism versus slider-crank mechanism in engines. Proceedings of the ASME Design Engineering Technical Conference (vol. 10).
4. ElBahloul, M. A.; Aziz, E. S.; Chassapis, C. (2019). Hypocycloid gear mechanism versus slider-crank mechanism in engines. Proceedings of the ASME Design Engineering Technical Conference (vol. 10).
5. Chang, Y.; Aziz, E. S.; Zhang, Z.; Zhang, M.; Esche, S. (2016). Evaluation of a video game adaptation for mechanical engineering educational laboratories. Proceedings - Frontiers in Education Conference, FIE (vol. 2016-November).
6. Chang, Y.; Aziz, E. S.; Zhang, Z.; Zhang, M.; Esche, S. (2016). Evaluation of a video game adaptation for mechanical engineering educational laboratories. Proceedings - Frontiers in Education Conference, FIE (vol. 2016-November).
7. Chang, Y.; Aziz, E. S.; Zhang, Z.; Zhang, M.; Esche, S. (2016). Evaluation of a video game adaptation for mechanical engineering educational laboratories. Proceedings - Frontiers in Education Conference, FIE (vol. 2016-November).
8. Chang, Y.; Aziz, E. S.; Zhang, Z.; Zhang, M.; Esche, S. (2015). Usability evaluation of a virtual educational laboratory platform. ASEE Annual Conference and Exposition, Conference Proceedings (122nd ASEE Annual Conference and Exposition: Making Value for Society ed., vol. 122nd ASEE Annual Conference and Exposition: Making Value for Society).
9. Chang, Y.; Aziz, E. S.; Zhang, Z.; Zhang, M.; Esche, S. (2015). Usability evaluation of a virtual educational laboratory platform. ASEE Annual Conference and Exposition, Conference Proceedings (122nd ASEE Annual Conference and Exposition: Making Value for Society ed., vol. 122nd ASEE Annual Conference and Exposition: Making Value for Society).
10. Chang, Y.; Aziz, E. S.; Zhang, Z.; Zhang, M.; Esche, S.; Chassapis, C. (2014). A platform for mechanical assembly education using the Microsoft Kinect. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 5).
11. Chang, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2013). A framework for developing collaborative training environments for assembling. ASEE Annual Conference and Exposition, Conference Proceedings.
12. Serdar, T.; Aziz, E. S.; Esche, S.; Chassapis, C. (2013). Integration of augmented reality into the CAD process. ASEE Annual Conference and Exposition, Conference Proceedings.
13. Zhang, M.; Zhang, Z.; Aziz, E. S.; Esche, S.; Chassapis, C. (2013). Kinect-based universal range sensor for laboratory experiments. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 5).
14. Zhang, Z.; Zhang, M.; Chang, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2013). Real-time 3D model reconstruction and interaction using kinect for a game-based virtual laboratory. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 5).
15. Aziz, E. S.; Chang, Y.; Esche, S.; Chassapis, C. (2012). Capturing assembly constraints of experimental setups in a virtual laboratory environment. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 5, pp. 191-200).
16. Aziz, E. S.; Corter, J. E.; Chang, Y.; Esche, S.; Chassapis, C. (2012). Evaluation of the learning effectiveness of game-based and hands-on gear train laboratories. Proceedings - Frontiers in Education Conference, FIE.
17. Chang, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2011). Assessment of the pilot implementation of a game-based gear design laboratory. Proceedings - Frontiers in Education Conference, FIE.
18. Chang, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2011). A game-based laboratory for gear design. ASEE Annual Conference and Exposition, Conference Proceedings.
19. Aziz, E. S.; Wang, Z.; Esche, S.; Chassapis, C. (2011). Development of a modularized architecture for remote-access laboratories. ASEE Annual Conference and Exposition, Conference Proceedings.
20. Serdar, T.; Aziz, E. S.; Esche, S.; Chassapis, C. (2011). Educational use of virtual worlds for engineering students. ASEE Annual Conference and Exposition, Conference Proceedings.
21. Chang, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2011). Overcoming the limitations of current online laboratory systems using game-based virtual environments. ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011 (vol. 5, pp. 159-168).
22. Aziz, E. S.; Chang, Y.; Tumkor, S.; Esche, S.; Chassapis, C. (2010). Adapting computer game technology to support engineering laboratories. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 6, pp. 75-85).
23. Dai, S.; Aziz, E. S.; Esche, S.; Chassapis, C. (2009). A remotely accessed flow rig student laboratory. ASME International Mechanical Engineering Congress and Exposition, Proceedings (vol. 9, pp. 259-267).
24. Arango, F.; Aziz, E. S.; Esche, S.; Chassapis, C. (2008). A review of applications of computer games in education and training. Proceedings - Frontiers in Education Conference, FIE.
25. Aziz, E. S.; Chassapis, C. (2008). Introduction to the ME curriculum through product engineering case studies. Proceedings - Frontiers in Education Conference, FIE.
26. Chassapis, C.; Aziz, E. S.; Esche, S. (2008). IT-enhanced laboratory experience within a mechanical engineering undergraduate curriculum. Proceedings of 18th Analysis and Computation Speciality Conference - Structures Congress 2008: Crossing the Borders (vol. 315).
27. Aziz, E. S. (2008). IT-enhanced teaching and learning in machine dynamics. ASEE Annual Conference and Exposition, Conference Proceedings.
28. Aziz, E. S.; Chassapis, C.; Esche, S.; Dai, S.; Xu, S.; Jia, R. (2008). Online wind tunnel laboratory. ASEE Annual Conference and Exposition, Conference Proceedings.
29. Arango, F.; Altuger, G.; Aziz, E. S.; Chassapis, C.; Esche, S. (2008). Piloting a game-based virtual learning environment. ASEE Annual Conference and Exposition, Conference Proceedings.
30. Li, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2007). Classification of and search for online laboratory resources using a coding approach. Proceedings - Frontiers in Education Conference, FIE.
31. Aziz, E. S.; Esche, S.; Chassapis, C. (2007). On the design of a Virtual Learning Environment for mechanical vibrations. Proceedings - Frontiers in Education Conference, FIE.
32. Aziz, E. S.; Esche, S.; Chassapis, C. (2007). Enhancing the learning experience using simulation and experimentation to teach mechanical vibrations. ASEE Annual Conference and Exposition, Conference Proceedings.
33. Aziz, E. S.; Chang, C.; Arango, F.; Esche, S.; Chassapis, C. (2007). Linking computer game engines with remote experiments. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 7, pp. 413-420).
34. Jia, R.; Shanjun, X.; Songyun, G.; Aziz, E. S.; Esche, S.; Chassapis, C. (2006). A virtual laboratory on fluid mechanics. ASEE Annual Conference and Exposition, Conference Proceedings.
35. Aziz, E. S.; Esche, S.; Chassapis, C. (2006). An architecture for virtual laboratory experimentation. ASEE Annual Conference and Exposition, Conference Proceedings.
36. Aziz, E. S.; Chassapis, C.; Esche, S. (2006). On the integration of remote and virtual experiments into a comprehensive student laboratory experience. Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Mechanical Engineering Education.
37. Aziz, E. S.; Chassapis, C. (2004). Development of process optimization for an intelligent knowledge-based system for spur gear precision forging die design. Proceedings of the ASME Design Engineering Technical Conference (vol. 1, pp. 313-320).
38. Aziz, E. S.; Chassapis, C. (2003). An intelligent design system for agile design and manufacturing of mechanical transmission systems. Proceedings of the ASME Design Engineering Technical Conference (vol. 4 A, pp. 397-408).
39. Aziz, E. S.; Chassapis, C. (2002). A knowledge-based approach to spur gear fabrication in precision forging process. ASME 2002 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2002 (vol. 2, pp. 505-515).
40. Aziz, E. S.; Chassapis, C. (2002). Development of an interactive web-based support system for gear design. ASME 2002 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2002 (vol. 2, pp. 753-763).
41. Aziz, E. S.; Chassapis, C. (2002). A knowledge-based approach to spur gear fabrication in precision forging process. Proceedings of the ASME Design Engineering Technical Conference (vol. 2, pp. 505-515).
42. Aziz, E. S.; Chassapis, C. (2002). Development of an interactive web-based support system for gear design. Proceedings of the ASME Design Engineering Technical Conference (vol. 2, pp. 753-763).
43. Aziz, E. S.; Chassapis, C. (2001). An intelligent system for spur gear design and analysis. Proceedings of the ASME Design Engineering Technical Conference (vol. 2, pp. 277-286).

Journal Article

1. Aziz, E. S. (2022). Kinematic and Dynamic Performances of the Hypocycloid Gear Mechanism for Internal Combustion Engine Applications. Research work. SAE International (2 ed., vol. 15, pp. 223-246). SAE.
   https://doi.org/10.4271/03-15-02-0010.
2. ElBahloul, M. A.; Aziz, E. S.; Chassapis, C. (2021). Performance study of the hypocycloid gear mechanism for internal combustion engine applications. International Journal of Engine Research (4 ed., vol. 22, pp. 1222-1238).
3. Aziz, E. S. (2019). Performance Study of the Hypocycloid Gear Mechanism for Internal Combustion Engine Applications. Research . International Journal on Engine Research (1 ed., vol. 1, pp. 1-17). Los Angeles, CA 91320: SAGE publisher.
   https://journals.sagepub.com/doi/10.1177/1468087419893583.
4. ElBahloul, M. A.; Aziz, E. L.; Chassapis, C. (2019). Mechanical efficiency prediction methodology of the hypocycloid gear mechanism for internal combustion engine application. International Journal on Interactive Design and Manufacturing (1 ed., vol. 13, pp. 221-233).
5. ElBahloul, M. A.; Aziz Ramadan, E. S.; Chassapis, C. (2019). Mechanical efficiency prediction methodology of the hypocycloid gear mechanism for internal combustion engine application. International Journal on Interactive Design and Manufacturing (1 ed., vol. 13, pp. 221-233).
6. ElBahloul, M. A.; Aziz, E. L.; Chassapis, C. (2019). Mechanical efficiency prediction methodology of the hypocycloid gear mechanism for internal combustion engine application. International Journal on Interactive Design and Manufacturing (1 ed., vol. 13, pp. 221-233).
7. ElBahloul, M. A.; Aziz, E. S.; Chassapis, C. (2019). Performance study of the hypocycloid gear mechanism for internal combustion engine applications. International Journal of Engine Research.
8. ElBahloul, M. A.; Aziz, E. S.; Chassapis, C. (2019). Performance study of the hypocycloid gear mechanism for internal combustion engine applications. International Journal of Engine Research.
9. Zhang, M.; Zhang, Z.; Chang, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2018). Recent developments in game-based virtual reality educational laboratories using the microsoft kinect. International Journal of Emerging Technologies in Learning (1 ed., vol. 13, pp. 138-159).
10. Aziz, E. S.; Chassapis, C. (2016). Enhanced Hypocycloid Gear Mechanism for Internal Combustion Engine Applications. Journal of Mechanical Design, Transactions of the ASME (12 ed., vol. 138).
11. Aziz, E. S.; Chassapis, C. (2016). Enhanced Hypocycloid Gear Mechanism for Internal Combustion Engine Applications. Journal of Mechanical Design, Transactions of the ASME (12 ed., vol. 138).
12. Aziz, E. S.; Chassapis, C. (2016). Enhanced Hypocycloid Gear Mechanism for Internal Combustion Engine Applications. Journal of Mechanical Design, Transactions of the ASME (12 ed., vol. 138).
13. Hu, Y.; Aziz, E. S.; Chassapis, C. (2016). Creativity-based design innovation environment in support of robust product development. International Journal on Interactive Design and Manufacturing (4 ed., vol. 10, pp. 335-353).
14. Hu, Y.; Aziz, E. S.; Chassapis, C. (2016). Creativity-based design innovation environment in support of robust product development. International Journal on Interactive Design and Manufacturing (4 ed., vol. 10, pp. 335-353).
15. Hu, Y.; Aziz, E. S.; Chassapis, C. (2016). Creativity-based design innovation environment in support of robust product development. International Journal on Interactive Design and Manufacturing (4 ed., vol. 10, pp. 335-353).
16. Chang, Y.; Aziz, E. S.; Zhang, Z.; Zhang, M.; Esche, S. (2016). Usability evaluation of a virtual educational laboratory platform. Computers in Education Journal (1 ed., vol. 16, pp. 24-36).
17. Chang, Y.; Aziz, E. S.; Zhang, Z.; Zhang, M.; Esche, S. (2016). Usability evaluation of a virtual educational laboratory platform. Computers in Education Journal (1 ed., vol. 16, pp. 24-36).
18. Chang, Y.; Aziz, E. S.; Zhang, Z.; Zhang, M.; Esche, S. (2016). Usability evaluation of a virtual educational laboratory platform. Computers in Education Journal (1 ed., vol. 16, pp. 24-36).
19. Chang, Y.; Aziz, E. S.; Zhang, Z.; Zhang, M.; Esche, S. (2016). Usability evaluation of a virtual educational laboratory platform. Computers in Education Journal (1 ed., vol. 16, pp. 24-36).
20. Aziz, E. S.; Chang, Y.; Esche, S.; Chassapis, C. (2015). Virtual Mechanical Assembly Training Based on a 3D Game Engine. Computer-Aided Design and Applications (2 ed., vol. 12, pp. 119-134).
21. Aziz, E. S.; Chang, Y.; Esche, S.; Chassapis, C. (2015). Virtual Mechanical Assembly Training Based on a 3D Game Engine. Computer-Aided Design and Applications (2 ed., vol. 12, pp. 119-134).
22. Aziz, E. S.; Chang, Y.; Esche, S.; Chassapis, C. (2014). A multi-user virtual laboratory environment for gear train design. Computer Applications in Engineering Education (4 ed., vol. 22, pp. 788-802).
23. Aziz, E. S.; Chassapis, C. (2014). Comparative analysis of tooth-root strength using stress-strength interference (SSI) theory with FEM-based verification. International Journal on Interactive Design and Manufacturing (3 ed., vol. 8, pp. 159-170).
24. Hamza, R. Z.; Diab, A. E.; Abd El-Aziz, E. S.; Hendawy, A. A. (2013). Immunotoxic effect of (organophosphorous insecticides) (chlorpyrifos, profenofos) and possible ameliorative role of propolis and ginseng. Biosciences Biotechnology Research Asia (2 ed., vol. 10, pp. 645-651).
25. Chang, Y.; Aziz, E. S.; Esche, S. (2012). A game-based laboratory for gear design. Computers in Education Journal (1 ed., vol. 22, pp. 21-31).
26. Aziz, E. S.; Esche, S.; Chassapis, C. (2010). An interactive game-based engineering laboratory. World Transactions on Engineering and Technology Education (2 ed., vol. 8, pp. 131-136).
27. Aziz, E. S.; Esche, S.; Chassapis, C. (2009). Content-rich interactive online laboratory systems. Computer Applications in Engineering Education (1 ed., vol. 17, pp. 61-79).
28. Arango, F.; Altuger, G.; Aziz, E. S.; Chassapis, C.; Esche, S. (2008). Piloting a game-based virtual learning environment. Computers in Education Journal (4 ed., vol. 18, pp. 82-91).
29. Aziz, E. S.; Chassapis, C. (2005). A decision-making framework model for design and manufacturing of mechanical transmission system development. Engineering with Computers (2 ed., vol. 21, pp. 164-176).
30. Aziz, E. S.; Chassapis, C. (2002). Knowledge-based geometry generation for spur and helical gears. Concurrent Engineering Research and Applications (3 ed., vol. 10, pp. 251-261).