The Laboratory for Multiscale Imaging (LMSI) is a vibrant research facility that promotes learning and research activities by offering training classes and seminars within an open and multiuser laboratory space.
The LMSI provides state-of-the-art instrumentation and expertise in morphological characterization to support and elevate research, and it helps leverage Stevens' capabilities to attract further support for new and significant self-sustaining programs.
It is open to the entire Stevens community as well as outside researchers.
The LMSI is directed by Prof. Matthew Libera, and it is staffed by full-time research scientist, Dr. Tsengming (Alex) Chou.
Instrumentation
Location : Burchard building B-013
Enable high performance and resolution SEM imaging
Can work with various type of “dried” samples
Live quantitative EDS system embedded with ChemiSEM platform
1 nm image resolution depends on samples/imaging conditions
Can run from 20 eV up to 30 keV electron energy
Biased stage up to 4 kV bias voltage
ETD, T1, T2, T3, and retractable BS detectors
See more details on the vendor’s website:
Location: Burchard building B-012
High resolution 3D x-ray microscope
40 to 100 kV x-ray source. < 5um spot size at 4W power. 10W max. power
16 MP sCMOS (4096x4096 pixels) detector
Sample size is up to 80 mm height and 75 mm in diameter
Build in software for:
NRECON – Transforms the 2D projection images into 3D volumes
DATAVIEWER – Slice-by-slice inspection of 3D volumes and 2D/3D image registration
CTVOX – Realistic visualization by volume rendering
CTAN – 2D/3D image analysis & processing
CTVOL – Visualization of surface models to export for CAD or 3D printing
See more details on the vendor’s website:
Location: Burchard building B-011A
Fully automatic microscope controlled via NIS Elements software
Noise piece focusing
High speed and sensitivity BT Fusion sCMOS camera
4 color LEDs for DAPI, Cy3, TexasRed, and Cy5 florescent imaging
Integrated with high-speed AX confocal that has 4 color lasers – UV, Blue, Green, and Red
See more details on the vendor’s website:
https://www.microscope.healthcare.nikon.com/products/upright-microscopes/eclipse-ni-series
https://www.microscope.healthcare.nikon.com/products/confocal-microscopes/ax
https://www.microscope.healthcare.nikon.com/products/software/nis-elements
Spec of the 2100Plus at Stevens
200kV LaB6 filament
High-specimen tilt (HT) pole piece
Point resolution @ 0.25 nm; Lattice resolution at 0.14 nm
HT can be selected at 80, 100, 120, 160, and 200 kV
Objective lens
Focus distance at 2.7 mm
Spherical aberration at 1.4 mm
Chromatic aberration at 1.8 mm
Minimum focus step at 1.8 nm
Spot size (in diameter)
TEM mode: 20 to 200 nm
EDS, NBD, CBD mode: 1.5 to 25 nm
Stage
X, Y: +/- 1.0 mm
Z: +/- 0.2 mm
Stage Tilt
With regular holder: +/- 42 degree in alpha and +/- 30 degree in beta tilt
With high-tilt holder: +/- 80 degree in alpha tilt only
Image shift: +/- 2.0 um
Florescent Screen
Large screen: 160 mm in diameter
Small screen: 25mm in diameter
Available holders:
Single tilt holder
Double tilt low background holder
Single tilt high-angle tiling holder
Gatan ELSA single tilt high-angle tilting cryo-holder
Capabilities
Digital imaging via a Gatan 4k by 4k Rio camera
BF/DF TEM imaging
BF/DF STEM imaging
Electron diffraction
TEM tomography
Cryo-microscopy
EDS is not available now but will be coming soon!
Regarding to basic information of becoming a self-user, hourly rate, training and etc., please click here to download the LMSI TEM Users Guide. Please contact Dr. Tsengming (Alex) Chou at 201-216-8310 if you have any questions.
Nanotechnology Workstation : combine both FE-SEM and HR-FIB, sample can be manipulated in nano-scale.
High Resolution FESEM
a GEMINI field-emission electron column that provides resolution of 1.0 nm @ 15 kV and 1.9 nm @ 1 kV.
This FE-SEM can:
magnification: 12x to 1000 kx
probe current: 4pA to 20 nA
HV: 0.1 to 30 kV
with in-lens SE detector, Everhart-Thornley type SE chamber detector, in-lens EsB (energy selective backscattering) detector, and a STEM BF/DF detector for the thin specimen.
N2 gas charge compensation device is also available.
High Resolution FIB
Resolution down to 2.5 nm @ 30 kV via this Cobra ion column
source: liquid metal gallium ion source
magnification: 300x to 500kx
probe current: 1 pA to 50 nA
HV: 1.0 to 30 kV
with Pt GIS (gas injection system) to provide both electron and ion beam induced deposition.
Introduction to 3D Reconstruction
Image stack of serial sectioned images at nano-scale can be produced on this system. Using Avizo 3D reconstruction and visualization platform, studies of 3D nano-structure can be achieved.
High Resolution STEM Imaging
Using the retractable BF/DF STEM detector, sample can be imaged in STEM (scanning transmission electron microscopy) mode via electrons have up to 30 kV energy. It provides structure information on a thin specimen.
TEM Sample Preparation
Automatic TEM sample preparation can be done using in-situ lift out method via Kleindiek nano-manipulator (model: MM3A).
Advanced Analytical Platform
A 80 mm2 Oxford SDD (silicon drift detector) EDS system provides a high through-put and high resolution microanalysis capability.
Electron and Ion Beam Lithography
Via Nabity's NPGS system, lithography can be done via either electron or ion beam.
Cryo-capability
A Leica VCT cryo-transfer system is coming soon to provide a cryo-EM capability on this system.
BioScope Resolve's seamless integration of atomic force microscopy and light microscopy reveals more detail and information of biological samples including mechanical properties. The system's unique design makes combined optical and AFM research easy with its open access to the sample, single instrument setup, and correlated data collection and analysis. Researchers can now perfectly connect real-time optical images with AFM imaging.
The new MIROView graphical interface and ScanAsyst-Cell mode ensure expert data generation, regardless of the user’s AFM experience level.
Integrates with a Nikon Ti-2 Florescent microscope with:
X-cite 120LED Boost light engine
5 filter cubes - BF, DAPI, GFP, DesRed, Cy5
4 Obj lens - 4x, 10x, ELWD20x , and ELWD40x
DIC and BF imaging
Single, integrated view and operation controls for AFM or optical microscope
Syncronized AFM images, force maps and single force curves with optical images and data
Point-and-click setup for automated force and imaging measurements
Video creation of experiments showing optical and AFM results
BioAFM accessories and PeakForce Tapping probes to meet every application
PeakForceQNM mode for accurate mechanical measurement of the materials
Regarding basic information on becoming a self-user, hourly rate, training, etc., please contact Dr. Tsengming (Alex) Chou at [email protected] if you have any questions.
Nikon E-1000 up-right florescent microscope with automatic stage control
A high sensitive monochromatic CCD camera for florescent imaging
Nikon C-1 LSCM with 3 lasers
Supporting Equipment
Gatan cryo-plunger
Gatan Dry Pumping station
Olympus optical microscope
SPI Au sputter coater
Leica Ultracut cryo/microtome
Leica HPM-100 high-pressure freezer
User Fees
Instrument | Outside Self-User | Additional Fee for Staff Assistance |
---|---|---|
TEM | $115/hr | $100/hr |
SEM | $165/hr | $100/hr |
AFM | Upon Request | $100/hr |
Nikon* | Upon Request | $100/hr |
TEM training: 2 hrs of lectures and 2 to 4 hrs of hands on practice. $500 for internal Stevens users and $2,000 for external users
SEM training: 2 hrs of video training, 2 to 4 hrs of hands on practice. $500 for internal Stevens users and $2,000 for external users
AFM and Nikon training will be arranged upon request. Please contact Alex Chou.
*Nikon E-1000 up-right light microscope with Epi-florescent, phase contrast, and LSCM (laser-scanning confocal microscopy).
Related Publications
Abraham, J., Prigiobbe, V., Abimbola, T., & Christodoulatos, C. (2023). Integrating biological and chemical CO2 sequestration using green microalgae for bioproducts generation. Frontiers in Climate, 4. https://doi.org/10.3389/fclim.2022.949411
Akhavan, J., Lyu, J., Mahmoud, Y., Xu, K., Vallabh, C. K. P., & Manoochehri, S. (2023). Dataset of in-situ coaxial monitoring and print’s cross-section images by Direct Energy Deposition fabrication. Scientific Data, 10(1). https://doi.org/10.1038/s41597-023-02672-4
Bariana, M., Zhang, B., Sun, J., Wang, W., Wang, J., Cassella, E., Myint, F., Anuncio, S. A., Ouk, S., Liou, H.-C., Tan, M., Wang, H., & Zakrzewski, J. L. (2023). Targeted Lymphoma Therapy Using a Gold Nanoframework-Based Drug Delivery System. ACS Applied Materials and Interfaces, 15(5), 6312–6325. https://doi.org/10.1021/acsami.2c17214
Cao, K., Zhang, F., Zaeri, A., Zhang, Y., Zgeib, R., Calzolaio, M., & Chang, R. C. (2023). Advances in design and quality of melt electrowritten scaffolds. Materials and Design, 226. https://doi.org/10.1016/j.matdes.2023.111618
Caulfield, B., Roberts, M., & Prigiobbe, V. (2023). Studying the effect of nickel, copper, and zinc on the precipitation kinetics and the composition of Ca-carbonates for the integrated process of CO2 mineralization and brine mining. Chemical Engineering Journal, 476. https://doi.org/10.1016/j.cej.2023.146220
Chen, J., Mir, S. M., Hudock, M. R., Pinezich, M. R., Chen, P., Bacchetta, M., Vunjak-Novakovic, G., & Kim, J. (2023). Opto-electromechanical quantification of epithelial barrier function in injured and healthy airway tissues. APL Bioengineering, 7(1). https://doi.org/10.1063/5.0123127
Chen, S., & Liang, J. F. (2023). Anticancer Activity of Nano-formulated Orlistat-Dopamine Conjugates Through Self-Assembly. Bioconjugate Chemistry. https://doi.org/10.1021/acs.bioconjchem.3c00045
Chuang, Y.-C., Alcantara, A., Fabris, G., Abderezaei, J., Lu, T.-A., Melendez-Vasquez, C. V, & Kurt, M. (2023). Myelination dictates axonal viscoelasticity. European Journal of Neuroscience. https://doi.org/10.1111/ejn.15954
Du, J., Guo, P., & Meng, W. (2023). Effect of water-based nanoclay and ambient temperature on rheological properties of UHPC pastes. Construction and Building Materials, 370. https://doi.org/10.1016/j.conbuildmat.2023.130733
Ezeonu, L., Tang, Z., Qi, Y., Huo, F., Zheng, Y., Koel, B. E., & Podkolzin, S. G. (2023). Adsorption, surface reactions and hydrodeoxygenation of acetic acid on platinum and nickel catalysts. Journal of Catalysis, 418, 190–202. https://doi.org/10.1016/j.jcat.2023.01.013
Feng, Y., Li, R., Mbonu, C., & Akcora, P. (2023). Effect of Oligomer Addition on Tube Dilation in Polymer Nanocomposite Melts. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202300620
He, S., Wang, J., Yang, F., Chang, T.-L., Tang, Z., Liu, K., Liu, S., Tian, F., Liang, J.-F., Du, H., & Liu, Y. (2023). Bacterial Detection and Differentiation of Staphylococcus aureus and Escherichia coli Utilizing Long-Period Fiber Gratings Functionalized with Nanoporous Coated Structures. Coatings, 13(4). https://doi.org/10.3390/coatings13040778
Jeong, C., Jung, J., Sheppard, K., & Choi, C.-H. (2023). Control of the Nanopore Architecture of Anodic Alumina via Stepwise Anodization with Voltage Modulation and Pore Widening. Nanomaterials, 13(2). https://doi.org/10.3390/nano13020342
Li, R., Bulucu, D., Chou, T., & Akcora, P. (2023). Enhanced Ion Conductivity in a Poly(ionic liquid)-Grafted Nanoparticle-Based Single-Ion Conductor. Macromolecules. https://doi.org/10.1021/acs.macromol.3c02623
Liu, T., Chang, T.-L., Zhou, X., Ruppel, S., & Liang, J. F. (2023). Phase separation enabled silver nano-array. Nanotechnology, 34(6). https://doi.org/10.1088/1361-6528/aca0f5
Liu, Z., Du, J., Steere, R., Schlegel, J. P., Khayat, K. H., & Meng, W. (2023). Cement-Based Materials with Solid-Gel Phase Change Materials for Improving Energy Efficiency of Building Envelope. Journal of Materials in Civil Engineering, 35(11). https://doi.org/10.1061/JMCEE7.MTENG-15925
Liu, Z., Shi, Q., Bao, Y., Meng, X., & Meng, W. (2023). Arsenate removal using titanium dioxide-doped cementitious composites: Mixture design, mechanisms, and simulated sewer application. Science of the Total Environment, 854. https://doi.org/10.1016/j.scitotenv.2022.158754
Ma, Z., Chen, J.-Y., Garikapati, M., Li, Z., Tang, C., Sua, Y. M., & Huang, Y.-P. (2023). Highly efficient and pure few-photon source on chip. Physical Review Applied, 20(4). https://doi.org/10.1103/PhysRevApplied.20.044033
Mafla, C., Kolenovic, B., Centeno, D., Darwish, J., Cabinian, K., Richards, K., Cattabiani, T., Nunez, J., Drwiega, T. J., Li, W., Iwanicki, M., Sciorra, L., Li, C., & Traba, C. (2023). Application of Argon Plasma Technology for the Synthesis of Anti-Infective Copper Nanoparticles. ACS Applied Bio Materials. https://doi.org/10.1021/acsabm.3c01097
Mankavi, F., Ibrahim, R., & Wang, H. (2023). Advances in Biomimetic Nerve Guidance Conduits for Peripheral Nerve Regeneration. Nanomaterials, 13(18). https://doi.org/10.3390/nano13182528
Ruppel, S. S., Li, R., & Liang, J. (2023). Glucose controlled surface coating with polydopamine. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 673. https://doi.org/10.1016/j.colsurfa.2023.131810
Ruppel, S. S., & Liang, J. (2023). Surface mineralization with controlled polymerization of dopamine. Journal of Applied Polymer Science. https://doi.org/10.1002/app.54603
Tang, Z., Chen, S., Osuala, C. I., Sakar, A. S., Hader, G., Cummings, A., Strauf, S., Qu, C., & Yang, E. (2023). Observations of Aharonov-Bohm Conductance Oscillations in CVD-grown Graphene Rings at 4 K. IEEE Open Journal of Nanotechnology, 1–7. https://doi.org/10.1109/OJNANO.2023.3331974
Wang, H., Fu, X., & Parimala Chelvi Ratnamani, M. (2023). Biomimetic nanofiber-enabled rapid creation of skin grafts. In Nanomedicine: Technologies and Applications (pp. 261–296). https://doi.org/10.1016/B978-0-12-818627-5.00009-9
Wang, J., Sun, J., Khade, R. L., Chou, T., An, H., Zhang, Y., & Wang, H. (2023). Liposome-Templated Green Synthesis of Mesoporous Metal Nanostructures with Universal Composition for Biomedical Application. Small. https://doi.org/10.1002/smll.202304880
Wang, W., Zhang, L., O’Dell, R., Yin, Z., Yu, D., Chen, H., Liu, J., & Wang, H. (2023). Microsphere-Enabled Modular Formation of Miniaturized In Vitro Breast Cancer Models. Small. https://doi.org/10.1002/smll.202307365
Wang, W., Zhou, X., Yin, Z., & Yu, X. (2023). Fabrication and Evaluation of Porous dECM/PCL Scaffolds for Bone Tissue Engineering. Journal of Functional Biomaterials, 14(7). https://doi.org/10.3390/jfb14070343
Wang, Y., Goodman, S., Bao, Y., & Meng, W. (2023). Morphological, microstructural, and mechanical properties of highly-ordered C–S–H regulated by cellulose nanocrystals (CNCs). Cement and Concrete Composites, 143. https://doi.org/10.1016/j.cemconcomp.2023.105276
Whittaker, S. J., McDowell, M., Bendesky, J., An, Z., Yang, Y., Zhou, H., Zhang, Y., Shtukenberg, A. G., Kalyon, D. M., Kahr, B., & Lee, S. S. (2023). Self-Patterning Tetrathiafulvalene Crystalline Films. Chemistry of Materials. https://doi.org/10.1021/acs.chemmater.3c01604
Xi, Y., Choi, C.-H., Chang, R., Kaper, H. J., & Sharma, P. K. (2023). Tribology of Pore-Textured Hard Surfaces under Physiological Conditions: Effects of Texture Scales. Langmuir. https://doi.org/10.1021/acs.langmuir.2c03377
Yang, X., Yan, D., Chou, T., & Kim, J. C. (2023). Electrochemical properties of a titanium-substituted KVPO4F cathode for K-ion batteries. Journal of Materials Chemistry A. https://doi.org/10.1039/d3ta01310c
Zhang, F., Cao, K., Zaeri, A., Zgeib, R., Buckley, C., Ma, Y., & Chang, R. C. (2023). Design, fabrication, and characterization of tubular scaffolds by way of a melt electrowriting process. Additive Manufacturing, 62. https://doi.org/10.1016/j.addma.2022.103383
Zhang, R., Napolano, R., Xi, B., Salazar, A. M., Shi, Q., Zhao, Y., & Meng, X. (2023). Mechanistic insights into Cr(VI) removal by a combination of zero-valent iron and pyrite. Chemosphere, 330. https://doi.org/10.1016/j.chemosphere.2023.138693
Zhou, G., Chen, Y., Dai, F., & Yu, X. (2023). Chitosan-based nerve guidance conduit with microchannels and nanofibers promotes schwann cells migration and neurite growth. Colloids and Surfaces B: Biointerfaces, 221. https://doi.org/10.1016/j.colsurfb.2022.112929
Anwar, A., Petrino, D. J., Alstine, N. Van, & Yu, X. (2022). Biodegradable Electrospun Nanofibrous Scaffolds for Bone Tissue Engineering. In A. Rasooly, H. Baker, & M. R. Ossandon (Eds.), Biomedical Engineering Technologies: Volume 2 (pp. 693–711). Springer US. https://doi.org/10.1007/978-1-0716-1811-0_36
Caulfield, B., Abraham, J., Christodoulatos, C., & Prigiobbe, V. (2022). Enhanced precipitation of magnesium carbonates using carbonic anhydrase. Nanoscale. https://doi.org/10.1039/d2nr03199j
Feng, Y., Wu, D., Li, R., & Akcora, P. (2022). Rheological properties of crosslinked unentangled and entangled Poly(methyl acrylate) nanocomposite networks. Polymer, 255. https://doi.org/10.1016/j.polymer.2022.125150
Fu, H., Chou, T., Potapenko, D., Bonvalet, P., & Archibald, S. (2022). Comparison of Different Microscopic Sample Preparation and Imaging Techniques for Visualization of Connective Tissue Components in Peripheral Nerve. Microscopy and Microanalysis, 28, 1376–1378. https://doi.org/10.1017/S143192762200561X
He, S., Wu, D., Chen, S., Liu, K., Yang, E.-H., Tian, F., & Du, H. (2022). Au-on-Ag nanostructure for in-situ SERS monitoring of catalytic reactions. Nanotechnology, 33(15). https://doi.org/10.1088/1361-6528/ac47d2
Kakanuru, P., & Pochiraju, K. (2022). Simulation of shrinkage during sintering of additively manufactured silica green bodies. Additive Manufacturing, 56. https://doi.org/10.1016/j.addma.2022.102908
Li, R., Han, Y., & Akcora, P. (2022). Ion channels in sulfonated copolymer-grafted nanoparticles in ionic liquids. Soft Matter. https://doi.org/10.1039/d2sm00725h
Liu, S., Li, R., Tyagi, M., & Akcora, P. (2022). Confinement Effects in Dynamics of Ionic Liquids with Polymer-Grafted Nanoparticles. ChemPhysChem. https://doi.org/10.1002/cphc.202200219
Liu, Z., Du, J., & Meng, W. (2022). Achieving low-carbon cementitious materials with high mechanical properties using CaCO3 suspension produced by CO2 sequestration. Journal of Cleaner Production, 373. https://doi.org/10.1016/j.jclepro.2022.133546
Mir, S. M., Chen, J., Pinezich, M. R., O’Neill, J. D., Huang, S. X. L., Vunjak-Novakovic, G., & Kim, J. (2022). Imaging-guided bioreactor for de-epithelialization and long-term cultivation of ex vivo rat trachea. Lab on a Chip, 22(5), 1018–1031. https://doi.org/10.1039/d1lc01105g
Na Nagara, V., Sarkar, D., Elzinga, E. J., & Datta, R. (2022). Removal of heavy metals from stormwater runoff using granulated drinking water treatment residuals. Environmental Technology and Innovation, 28. https://doi.org/10.1016/j.eti.2022.102636
Robbins, J. P., Ezeonu, L., Tang, Z., Yang, X., Koel, B. E., & Podkolzin, S. G. (2022). Propane Dehydrogenation to Propylene and Propylene Adsorption on Ni and Ni-Sn Catalysts. ChemCatChem. https://doi.org/10.1002/cctc.202101546
Ruppel, S. S., & Liang, J. (2022). Tunable Properties of Polydopamine Nanoparticles and Coated Surfaces. Langmuir. https://doi.org/10.1021/acs.langmuir.2c00719
Sui, C., Zilberberg, J., & Lee, W. (2022). Microfluidic device engineered to study the trafficking of multiple myeloma cancer cells through the sinusoidal niche of bone marrow. Scientific Reports, 12(1). https://doi.org/10.1038/s41598-022-05520-4
Sul, O., Seo, H., Choi, E., Kim, S., Gong, J., Bang, J., Ju, H., Oh, S., Lee, Y., Sun, H., Kwon, M., Kang, K., Hong, J., Yang, E.-H., Chung, Y., & Lee, S.-B. (2022). An Ultralow Power Mixed Dimensional Heterojunction Transistor Based on the Charge Plasma pn Junction. Small. https://doi.org/10.1002/smll.202202153
Sun, J., Wang, J., Hu, W., Wang, Y., Zhang, Q., Hu, X., Chou, T., Zhang, B., Gallaro, C., Halloran, M., Liang, L., Ren, L., & Wang, H. (2022). A Porous Bimetallic Au@Pt Core-Shell Oxygen Generator to Enhance Hypoxia-Dampened Tumor Chemotherapy Synergized with NIR-II Photothermal Therapy. ACS Nano. https://doi.org/10.1021/acsnano.2c02528
Tang, R., & Du, H. (2022). Fabrication of anodic aluminum oxide on silica optical fiber with nanopore channels oriented off surface normal. Journal of the American Ceramic Society. https://doi.org/10.1111/jace.18621
Wang, H., Zhou, X., Wang, J., Zhang, X., Zhu, M., & Wang, H. (2022). Fabrication of channeled scaffolds through polyelectrolyte complex (PEC) printed sacrificial templates for tissue formation. Bioactive Materials. https://doi.org/10.1016/j.bioactmat.2022.01.030
Wu, D., Ge, Y., Li, R., Feng, Y., & Akcora, P. (2022). Thermally Activated Shear Stiffening in Polymer-Grafted Nanoparticle Composites for High-Temperature Adhesives. ACS Applied Polymer Materials. https://doi.org/10.1021/acsapm.2c00097
Zhang, F., Cao, K., Zaeri, A., Zgeib, R., & Chang, R. C. (2022a). Design, fabrication, and analysis of spatially heterogeneous scaffold by melt electrospinning writing of poly(ε-Caprolactone). Journal of Applied Polymer Science. https://doi.org/10.1002/app.52235
Zhang, F., Cao, K., Zaeri, A., Zgeib, R., & Chang, R. C. (2022b). Effects of Printing Sequence on the Printing Accuracy of Melt Electrowriting Scaffolds. Macromolecular Materials and Engineering. https://doi.org/10.1002/mame.202200222
Zhang, F., Cao, K., Zaeri, A., Zgeib, R., & Chang, R. C. (2022c). Effects of scaffold design parameters on the printing accuracy for melt electrowriting. Journal of Manufacturing Processes, 81, 177–190. https://doi.org/10.1016/j.jmapro.2022.06.070
Zhao, W., Libera, M., Prysak, M., Katz, J., & De Stefano, L. (2022). An in vitro model of microbial contamination in the operating room. Journal of Biomedical Materials Research - Part B Applied Biomaterials. https://doi.org/10.1002/jbm.b.35104
Asawa, K., Kumar, S., Huang, Y., & Choi, C. H. (2021). Guiding light via slippery liquid-infused porous surfaces. Applied Physics Letters, 118(9), 091602. https://doi.org/10.1063/5.0038910
Chen, J., Mir, S. M., Pinezich, M. R., O’Neill, J. D., Guenthart, B. A., Bacchetta, M., Vunjak-Novakovic, G., Huang, S. X. L., & Kim, J. (2021). Homogeneous Distribution of Exogenous Cells onto De-epithelialized Rat Trachea via Instillation of Cell-Loaded Hydrogel. ACS Biomaterials Science & Engineering, acsbiomaterials.1c01031. https://doi.org/10.1021/ACSBIOMATERIALS.1C01031
Liang, J., Xiao, X., Chou, T.-M., & Libera, M. (2021). Analytical Cryo-Scanning Electron Microscopy of Hydrated Polymers and Microgels. Accounts of Chemical Research, 54(10), 2386–2396. https://doi.org/10.1021/acs.accounts.1c00109
Liu, Y., & Choi, C.-H. (2021). Superhydrophobic Sands for the Preservation and Purification of Water. Coatings, 11(2), 151. https://doi.org/10.3390/coatings11020151
Sun, J., Wang, J., Hu, W., Wang, Y., Chou, T., Zhang, Q., Zhang, B., Yu, Z., Yang, Y., Ren, L., & Wang, H. (2021). Camouflaged Gold Nanodendrites Enable Synergistic Photodynamic Therapy and NIR Biowindow II Photothermal Therapy and Multimodal Imaging. ACS Applied Materials & Interfaces, 13(9), 10778–10795. https://doi.org/10.1021/acsami.1c01238
Tang, Z., Chen, T., Liu, K., Du, H., & Podkolzin, S. G. (2021). Atomic, Molecular and Hybrid Oxygen Structures on Silver. Langmuir, 37(39), 11603–11610. https://doi.org/10.1021/ACS.LANGMUIR.1C01941
Wei, J., Duan, L., Wei, J., Hoffmann, E., Song, Y., & Meng, X. (2021). Lead removal from water using organic acrylic amine fiber (AAF) and inorganic-organic P-AAF, fixed bed filtration and surface-induced precipitation. Journal of Environmental Sciences (China), 101, 135–144. https://doi.org/10.1016/j.jes.2020.08.009
Xiao, X., Ji, J., Zhao, W., Nangia, S., & Libera, M. (2021). Salt Destabilization of Cationic Colistin Complexation within Polyanionic Microgels. Macromolecules. https://doi.org/10.1021/acs.macromol.1c02157
Chang, T. L., Sun, P. K., Zhou, X., Besser, R. S., & Liang, J. (2020). Preparation and electrochemical performances of silver (alloy) nanoparticles decorated on reduced graphene oxide, using self-polymerization of dopamine in an acidic environment. Materials Today Chemistry, 17, 100312. https://doi.org/10.1016/j.mtchem.2020.100312
Chang, W., Shah, M. B., Zhou, G., Walsh, K., Rudraiah, S., Kumbar, S. G., & Yu, X. (2020). Polymeric nanofibrous nerve conduits coupled with laminin for peripheral nerve regeneration. Biomedical Materials (Bristol), 15(3). https://doi.org/10.1088/1748-605X/ab6994
Fu, S., Kang, K., Shayan, K., Yoshimura, A., Dadras, S., Wang, X., … Yang, E. H. (2020). Enabling room temperature ferromagnetism in monolayer MoS2 via in situ iron-doping. Nature Communications, 11(1). https://doi.org/10.1038/s41467-020-15877-7
Guo, P., Meng, W., Nassif, H., Gou, H., & Bao, Y. (2020, October 10). New perspectives on recycling waste glass in manufacturing concrete for sustainable civil infrastructure. Construction and Building Materials, Vol. 257. https://doi.org/10.1016/j.conbuildmat.2020.119579
Hu, W., Song, X., Yu, H., Sun, J., & Zhao, Y. (2020). Released Exosomes Contribute to the Immune Modulation of Cord Blood-Derived Stem Cells. Frontiers in Immunology, 11. https://doi.org/10.3389/fimmu.2020.00165
Jin, Y., Zheng, Y., Podkolzin, S. G., & Lee, W. (2020). Band gap of reduced graphene oxide tuned by controlling functional groups. Journal of Materials Chemistry C, 8(14), 4885–4894. https://doi.org/10.1039/c9tc07063j
Junka, R., & Yu, X. (2020). Polymeric nanofibrous scaffolds laden with cell-derived extracellular matrix for bone regeneration. Materials Science and Engineering C, 113. https://doi.org/10.1016/j.msec.2020.110981
Kalyon, D. M., & Fisher, F. T. (2020). Impact of ultrasonication on carbon nanotube demixing and damage in polymer nanocomposites. Journal of Applied Polymer Science. https://doi.org/10.1002/app.49370
Kumar, A., Mir, S. M., Aldulijan, I., Mahajan, A., Anwar, A., Leon, C. H., … Yu, X. (2020). Load-bearing biodegradable PCL-PGA-beta TCP scaffolds for bone tissue regeneration. Journal of Biomedical Materials Research - Part B Applied Biomaterials. https://doi.org/10.1002/jbm.b.34691
Shi, Q., Zhang, S., Ge, J., Wei, J., Christodoulatos, C., Korfiatis, G. P., & Meng, X. (2020). Lead immobilization by phosphate in the presence of iron oxides: Adsorption versus precipitation. Water Research, 179, 115853. https://doi.org/10.1016/j.watres.2020.115853
Wang, J., Sun, J., Hu, W., Wang, Y., Chou, T., Zhang, B., … Wang, H. (2020). A Porous Au@RhBimetallic Core–Shell Nanostructure as an H2O2-Driven Oxygenerator to Alleviate Tumor Hypoxia for Simultaneous Bimodal Imaging and Enhanced Photodynamic Therapy. Advanced Materials. https://doi.org/10.1002/adma.202001862
Wang, J., Sun, J., Wang, Y., Chou, T., Zhang, Q., Zhang, B., … Wang, H. (2020). Gold Nanoframeworks with Mesopores for Raman–Photoacoustic Imaging and Photo-Chemo Tumor Therapy in the Second Near-Infrared Biowindow. Advanced Functional Materials. https://doi.org/10.1002/adfm.201908825
Wei, J., Meng, X., Song, Y., Shi, Q., Wen, X., & Korfiatis, G. (2020). Surface mole-ratio method to distinguish surface precipitation and adsorption on solid-liquid interface. Journal of Hazardous Materials, 397. https://doi.org/10.1016/j.jhazmat.2020.122781 Iyer Ganapathi, J., Lee, S. S.,
Xiao, X., Zhao, W., Liang, J., Sauer, K., & Libera, M. (2020). Self-defensive antimicrobial biomaterial surfaces. Colloids and Surfaces B: Biointerfaces, 192. https://doi.org/10.1016/j.colsurfb.2020.110989
Yang, Y., Robbins, J. P., Ezeonu, L., Ma, Y., Sparta, N., Kong, X., … Lee, S. S. (2020). Probing lattice vibrations of stabilized CsPbI3polymorphs: Via low-frequency Raman spectroscopy. Journal of Materials Chemistry C, 8(26), 8896–8903. https://doi.org/10.1039/d0tc02123g
Ye, Z., & Prigiobbe, V. (2020). Transport of produced water through reactive porous media. Water Research, 185, 116258. https://doi.org/10.1016/j.watres.2020.116258
Zhang, S., Shi, Q., Korfiatis, G., Christodoulatos, C., Wang, H., & Meng, X. (2020). Chromate removal by electrospun PVA/PEI nanofibers: Adsorption, reduction, and effects of co-existing ions. Chemical Engineering Journal, 387. https://doi.org/10.1016/j.cej.2020.124179
Zhou, G., Chang, W., Zhou, X., Chen, Y., Dai, F., Anwar, A., & Yu, X. (2020). Nanofibrous Nerve Conduits with Nerve Growth Factors and Bone Marrow Stromal Cells Pre-Cultured in Bioreactors for Peripheral Nerve Regeneration. ACS Applied Materials and Interfaces, 12(14), 16168–16177. https://doi.org/10.1021/acsami.0c04191
Zhou, X., Hou, C., Chang, T. L., Zhang, Q., & Liang, J. F. (2020). Controlled released of drug from doubled-walled PVA hydrogel/PCL microspheres prepared by single needle electrospraying method. Colloids and Surfaces B: Biointerfaces, 187. https://doi.org/10.1016/j.colsurfb.2019.110645
Zong, K., Asawa, K. M., Circelli, A., Sparta, N., Choi, C. H., & Lee, S. S. (2020). Graphoepitaxy-Directed Assembly of Organic Semiconductor Single Crystals into Trellis Structures. ACS Materials Letters, 2(7), 721–726. https://doi.org/10.1021/acsmaterialslett.0c00153
Chang, T.-L., Zhou, X., & Liang, J. (2019). Synthesis and characterization of Ag-Cu alloy nanoparticles for antimicrobial applications: A polydopamine chemistry application. Materials Science and Engineering: C, 98, 675–684. https://doi.org/10.1016/J.MSEC.2018.12.092
He, J., Lee, S. S., Colakyan, M., & Kalyon, D. M. (2019). Viscoelastic properties and flow instabilities of aqueous suspensions of cellulosic fibers. Retrieved from http://arxiv.org/abs/1903.07736
Jiang, Y., Xu, W., Sarshar, M. A., & Choi, C.-H. (2019). Generalized models for advancing and receding contact angles of fakir droplets on pillared and pored surfaces. Journal of Colloid and Interface Science, 552, 359–371. https://doi.org/10.1016/J.JCIS.2019.05.053
Jin, Y., & Lee, W. (2019). Cross-Linking Stabilizes Electrical Resistance of Reduced Graphene Oxide in Humid Environments. Langmuir, 35(16), 5427–5434. https://doi.org/10.1021/acs.langmuir.8b03416
Kong, X., Zong, K., & Lee, S. S. (2019). Nanoconfining Optoelectronic Materials for Enhanced Performance and Stability. Chemistry of Materials, 31(14), 4953–4970. https://doi.org/10.1021/acs.chemmater.9b01707
Kong, X., Shayan, K., Hua, S., Strauf, S., & Lee, S. S. (2019). Complete Suppression of Detrimental Polymorph Transitions in All-Inorganic Perovskites via Nanoconfinement. ACS Applied Energy Materials, 2(4), 2948–2955. https://doi.org/10.1021/acsaem.9b00322
Kumar, A., Zhang, Y., Terracciano, A., Zhao, X., Su, T.-L., Kalyon, D. M., … Yu, X. (2019). Load-bearing biodegradable polycaprolactone-poly (lactic-co-glycolic acid)- beta tri-calcium phosphate scaffolds for bone tissue regeneration. Polymers for Advanced Technologies. https://doi.org/10.1002/pat.4551
Lee, J., Wooh, S., & Choi, C.-H. (2019). Fluorocarbon lubricant impregnated nanoporous oxide for omnicorrosion-resistant stainless steel. Journal of Colloid and Interface Science, 558, 301–309. https://doi.org/10.1016/J.JCIS.2019.09.117
Liang, J., Wang, H., & Libera, M. (2019). Biomaterial surfaces self-defensive against bacteria by contact transfer of antimicrobials. Biomaterials, 204, 25–35. https://doi.org/10.1016/J.BIOMATERIALS.2019.03.006
Liang, J., Xiao, X., Chou, T.-M., & Libera, M. (2019). Counterion Exchange in Peptide-Complexed Core–Shell Microgels. Langmuir, 35(29), 9521–9528. https://doi.org/10.1021/acs.langmuir.9b01058
Liu, K., Ohodnicki, P. R., Kong, X., Lee, S. S., & Du, H. (2019). Plasmonic Au nanorods stabilized within anodic aluminum oxide pore channels against high-temperature treatment. Nanotechnology, 30(40), 405704. https://doi.org/10.1088/1361-6528/ab2a3f
Liu, K., Wuenschell, J., Bera, S., Tang, R., Ohodnicki, P. R., & Du, H. (2019). Nanostructured sapphire optical fiber embedded with Au nanorods for high-temperature plasmonics in harsh environments. Optics Express, 27(26), 38125. https://doi.org/10.1364/OE.27.038125
Liu, S., Liedel, C., Tarakina, N. V., Osti, N. C., & Akcora, P. (2019). Dynamics of ionic liquids in the presence of polymer-grafted nanoparticles. Nanoscale, 11(42), 19832–19841. https://doi.org/10.1039/C9NR04204K
Liu, T., Yang, F., Wang, X., & Liang, J. F. (2019). Adhesive Gold Nanoparticles for Easy and Controlled Surface Coating. Langmuir, 35(7), 2728–2737. https://doi.org/10.1021/acs.langmuir.8b04110
Tourlomousis, F., Jia, C., Karydis, T., Mershin, A., Wang, H., Kalyon, D. M., & Chang, R. C. (2019). Machine learning metrology of cell confinement in melt electrowritten three-dimensional biomaterial substrates. Microsystems & Nanoengineering, 5(1), 15. https://doi.org/10.1038/s41378-019-0055-4
Wang, X., Kang, K., Godin, K., Fu, S., Chen, S., & Yang, E.-H. (2019). Effects of solvents and polymer on photoluminescence of transferred WS 2 monolayers. Journal of Vacuum Science & Technology B, 37(5), 052902. https://doi.org/10.1116/1.5094543
Wei, J., Meng, X., Wen, X., & Song, Y. (2020). Adsorption and recovery of phosphate from water by amine fiber, effects of co-existing ions and column filtration. Journal of Environmental Sciences, 87, 123–132. https://doi.org/10.1016/J.JES.2019.05.009
Yang, F., Chang, T.-L., Liu, T., Wu, D., Du, H., Liang, J., & Tian, F. (2019). Label-free detection of Staphylococcus aureus bacteria using long-period fiber gratings with functional polyelectrolyte coatings. Biosensors and Bioelectronics, 133, 147–153. https://doi.org/10.1016/J.BIOS.2019.03.024
Yang, F., Hlushko, R., Wu, D., Sukhishvili, S. A., Du, H., & Tian, F. (2019). Ocean Salinity Sensing Using Long-Period Fiber Gratings Functionalized with Layer-by-Layer Hydrogels. ACS Omega, 4(1), 2134–2141. https://doi.org/10.1021/acsomega.8b02823
Ye, Z., Abraham, J., Christodoulatos, C., & Prigiobbe, V. (2019). Mineral Carbonation for Carbon Utilization in Microalgae Culture. Energy & Fuels, 33(9), 8843–8851. https://doi.org/10.1021/acs.energyfuels.9b01232
Zhang, R., Yan, K., Palumbo, A., Xu, J., Fu, S., & Yang, E.-H. (2019). A stretchable and bendable all-solid-state pseudocapacitor with dodecylbenzenesulfonate-doped polypyrrole-coated vertically aligned carbon nanotubes partially embedded in PDMS. Nanotechnology, 30(9), 095401. https://doi.org/10.1088/1361-6528/aaf135
Zhang, S., Shi, Q., Christodoulatos, C., Korfiatis, G., & Meng, X. (2019). Adsorptive filtration of lead by electrospun PVA/PAA nanofiber membranes in a fixed-bed column. Chemical Engineering Journal, 370, 1262–1273. https://doi.org/10.1016/J.CEJ.2019.03.294
Zhang, S., Shi, Q., Christodoulatos, C., & Meng, X. (2019). Lead and cadmium adsorption by electrospun PVA/PAA nanofibers: Batch, spectroscopic, and modeling study. Chemosphere, 233, 405–413. https://doi.org/10.1016/J.CHEMOSPHERE.2019.05.190
Zhou, X., Chang, T.-L., Chen, S., Liu, T., Wang, H., & Liang, J. F. (2019). Polydopamine-Decorated Orlistat-Loaded Hollow Capsules with an Enhanced Cytotoxicity against Cancer Cell Lines. Molecular Pharmaceutics, 16(6), 2511–2521. https://doi.org/10.1021/acs.molpharmaceut.9b00116
Zong, K., Ma, Y., Shayan, K., Ly, J., Renjilian, E., Hu, C., … Lee, S. S. (2019). Directing Solution-Phase Nucleation To Form Organic Semiconductor Vertical Crystal Arrays. Crystal Growth & Design, acs.cgd.9b00321. https://doi.org/10.1021/acs.cgd.9b00321
Albright, V., Xu, M., Palanisamy, A., Cheng, J., Stack, M., Zhang, B., … Wang, H. (2018). Micelle-Coated, Hierarchically Structured Nanofibers with Dual-Release Capability for Accelerated Wound Healing and Infection Control. Advanced Healthcare Materials, 7(11), 1800132. https://doi.org/10.1002/adhm.201800132
Chang, W., Shah, M. B., Lee, P., & Yu, X. (2018). Tissue-engineered spiral nerve guidance conduit for peripheral nerve regeneration. Acta Biomaterialia. https://doi.org/10.1016/J.ACTBIO.2018.04.046
Chen, J.-Y., Sua, Y. M., Ma, Z., Tang, C., Li, Z., Huang, Y.-P., … Huang, Y.-P. (2018). Efficient second-harmonic generation in sub-micron PPLN waveguides. Frontiers in Optics / Laser Science, JTu2A.87. https://doi.org/10.1364/FIO.2018.JTu2A.87
Du, K., Jiang, Y., Liu, Y., Wathuthanthri, I., & Choi, C.-H. (2018). Manipulation of the Superhydrophobicity of Plasma-Etched Polymer Nanostructures. Micromachines, 9(6), 304. https://doi.org/10.3390/mi9060304
Hadnagy, E., Mai, A., Smolinski, B., Braida, W., & Koutsospyros, A. (2018). Characterization of Mg-based bimetal treatment of insensitive munition 2,4-dinitroanisole. Environmental Science and Pollution Research, 25(24), 24403–24416. https://doi.org/10.1007/s11356-018-2493-1
He, J., Lee, S. S., & Kalyon, D. M. (2019). Shear viscosity and wall slip behavior of dense suspensions of polydisperse particles. Journal of Rheology, 63(1), 19–32. https://doi.org/10.1122/1.5053702
Jia, Z., Kim, J.-H., Yi, G.-R., & Lee, S. S. (2018). Transition of Dielectrophoresis-Assembled 2D Crystals to Interlocking Structures under a Magnetic Field. Langmuir, 34(41), 12412–12418. https://doi.org/10.1021/acs.langmuir.8b02706
Jiang, Y., Sun, Y., Drelich, J. W., & Choi, C.-H. (2018). Spontaneous Spreading of a Droplet: The Role of Solid Continuity and Advancing Contact Angle. Langmuir, 34(17), 4945–4951. https://doi.org/10.1021/acs.langmuir.8b00522
Jin, Y., Boon, E. P., Le, L. T., & Lee, W. (2018). Fabric-infused array of reduced graphene oxide sensors for mapping of skin temperatures. Sensors and Actuators A: Physical, 280, 92–98. https://doi.org/10.1016/J.SNA.2018.06.043
Joshi, S., Cook, E., & Mannoor, M. S. (2018). Bacterial Nanobionics via 3D Printing. Nano Letters, acs.nanolett.8b02642. https://doi.org/10.1021/acs.nanolett.8b02642
Kong, X., Shayan, K., Lee, S., Ribeiro, C., Strauf, S., & Lee, S. S. (2018). Remarkable long-term stability of nanoconfined metal–halide perovskite crystals against degradation and polymorph transitions. Nanoscale, 10(17), 8320–8328. https://doi.org/10.1039/C8NR01352G
Li, J., Zheng, C., Liu, B., Chou, T., Kim, Y., Qiu, S., … Fu, J. (2018). Controlled graphene encapsulation: a nanoscale shield for characterising single bacterial cells in liquid. Nanotechnology, 29(36), 365705. https://doi.org/10.1088/1361-6528/aacba7
Liu, K., Ma, Y., & Du, H. (2018). Tailoring the nanostructure of anodic aluminum oxide cladding on optical fiber. Journal of the American Ceramic Society, 101(12), 5836–5845. https://doi.org/10.1111/jace.15859
Liu, S., Wang, H., & Akcora, P. (2018). Ordering Polymer-Grafted Nanoparticles at Oil-Air Interfaces under Magnetic Fields. Macromolecular Chemistry and Physics, 1800012. https://doi.org/10.1002/macp.201800012
Liu, T., & Liang, J. F. (2018). Nanostructured surfaces from high-density grafted poly (acrylic acid) with liquid-like property. Reactive and Functional Polymers, 127, 123–128. https://doi.org/10.1016/J.REACTFUNCTPOLYM.2018.04.007
Ma, Y., Teng, F., & Libera, M. (2018). Solid-Phase Nucleic Acid Sequence-Based Amplification and Length-Scale Effects during RNA Amplification. Analytical Chemistry, acs.analchem.8b00058. https://doi.org/10.1021/acs.analchem.8b00058
Sarshar, M. A., Song, D., Swarctz, C., Lee, J., & Choi, C.-H. (2018). Anti-Icing or Deicing: Icephobicities of Superhydrophobic Surfaces with Hierarchical Structures. Langmuir, 34(46), 13821–13827. https://doi.org/10.1021/acs.langmuir.8b02231
Shah, M. B., Chang, W., Zhou, G., Glavy, J. S., Cattabiani, T. M., & Yu, X. (2018). Novel spiral structured nerve guidance conduits with multichannels and inner longitudinally aligned nanofibers for peripheral nerve regeneration. Journal of Biomedical Materials Research Part B: Applied Biomaterials. https://doi.org/10.1002/jbm.b.34233
Shi, Q., Sterbinsky, G. E., Prigiobbe, V., & Meng, X. (2018). Mechanistic Study of Lead Adsorption on Activated Carbon. Langmuir, 34(45), 13565–13573. https://doi.org/10.1021/acs.langmuir.8b03096
Teng, F., & Libera, M. (2018). Microlens Enhancement of Surface-Tethered Molecular Beacons. Langmuir, acs.langmuir.8b02204. https://doi.org/10.1021/acs.langmuir.8b02204
Yang, S., Hassan, M., & Akcora, P. (2018). Role of adsorbed chain rigidity in reinforcement of polymer nanocomposites. Journal of Polymer Science Part B: Polymer Physics. https://doi.org/10.1002/polb.24751
Yang, S., Liu, S., Narayanan, S., Zhang, C., & Akcora, P. (2018). Chemical heterogeneity in interfacial layers of polymer nanocomposites. Soft Matter, 14(23), 4784–4791. https://doi.org/10.1039/C8SM00663F
Yang, Y., Hu, Y., Du, H., Ren, L., & Wang, H. (2018). Colloidal plasmonic gold nanoparticles and gold nanorings: shape-dependent generation of singlet oxygen and their performance in enhanced photodynamic cancer therapy. International Journal of Nanomedicine, Volume 13, 2065–2078. https://doi.org/10.2147/IJN.S156347
Ambi, A., Bryan, J., Borbon, K., Centeno, D., Liu, T., Chen, T. P., … Traba, C. (2017). Are Russian propolis ethanol extracts the future for the prevention of medical and biomedical implant contaminations? Phytomedicine, 30, 50–58. https://doi.org/10.1016/j.phymed.2017.03.006
Bachhar, N., Jiao, Y., Asai, M., Akcora, P., Bandyopadhyaya, R., & Kumar, S. K. (2017). Impact of the Distributions of Core Size and Grafting Density on the Self-Assembly of Polymer Grafted Nanoparticles. Macromolecules, acs.macromol.7b01093. https://doi.org/10.1021/acs.macromol.7b01093
Bai, X., Zong, K., Ly, J., Mehta, J. S., Hand, M., Molnar, K., … Lee, S. S. (2017). Orientation Control of Solution-Processed Organic Semiconductor Crystals To Improve Out-of-Plane Charge Mobility. Chemistry of Materials, 29(17), 7571–7578. https://doi.org/10.1021/acs.chemmater.7b02771
Benchafia, E. M., Yao, Z., Yuan, G., Chou, T., Piao, H., Wang, X., & Iqbal, Z. (2017). Cubic gauche polymeric nitrogen under ambient conditions. Nature Communications, 8(1), 930. https://doi.org/10.1038/s41467-017-01083-5
Chen, T.-P., Liang, J., & Su, T.-L. (2017). Plasma-activated water: antibacterial activity and artifacts? Environmental Science and Pollution Research, 1–8. https://doi.org/10.1007/s11356-017-9169-0
Chen, T.-P., Liu, T., Su, T.-L., & Liang, J. (2017). Self-Polymerization of Dopamine in Acidic Environments without Oxygen. Langmuir, 33(23), 5863–5871. https://doi.org/10.1021/acs.langmuir.7b01127
Doukkali, M., Patel, R. B., Stepanov, V., & Hadim, H. (2017). The Effect of Ionic Strength and pH on the Electrostatic Stabilization of NanoRDX. Propellants, Explosives, Pyrotechnics. https://doi.org/10.1002/prep.201700096
Gu, J., Valdevit, A., Chou, T.-M., Libera, M., Mei, H. C. van der, Ren, D., … Sjollema, J. (2017). Substrate effects on cell-envelope deformation during early-stage Staphylococcus aureus biofilm formation. Soft Matter, 13(16), 2967–2976. https://doi.org/10.1039/C6SM02815B
Ivanov, O. V., Yang, F., Tian, F., & Du, H. (2017). Thin-core fiber structures with overlays for sensing applications. Optics Express, 25(25), 31197. https://doi.org/10.1364/OE.25.031197
Jia, Z., Sacanna, S., & Lee, S. S. (2017). Dielectrophoretic assembly of dimpled colloids into open packing structures. Soft Matter, 13(34), 5724–5730. https://doi.org/10.1039/C7SM00874K
Jiang, Y., Xu, J., Lee, J., Du, K., Yang, E.-H., Moon, M.-W., & Choi, C.-H. (2017). Nanotexturing of Conjugated Polymers via One-Step Maskless Oxygen Plasma Etching for Enhanced Tunable Wettability. Langmuir, 33(27), 6885–6894. https://doi.org/10.1021/acs.langmuir.7b01593
Kang, K., Godin, K., Kim, Y. D., Fu, S., Cha, W., Hone, J., & Yang, E.-H. (2017). Graphene-Assisted Antioxidation of Tungsten Disulfide Monolayers: Substrate and Electric-Field Effect. Advanced Materials, 29(18), 1603898. https://doi.org/10.1002/adma.201603898
Lee, J., Shin, S., Jiang, Y., Jeong, C., Stone, H. A., & Choi, C.-H. (2017). Oil-Impregnated Nanoporous Oxide Layer for Corrosion Protection with Self-Healing. Advanced Functional Materials, 1606040. https://doi.org/10.1002/adfm.201606040
Liang, J., Teng, F., Chou, T.-M., & Libera, M. (2017). Measuring microgel swell ratio by cryo-SEM. In Polymer (Vol. 116). https://doi.org/10.1016/j.polymer.2017.03.050
Liu, K., Chen, T., He, S., Robbins, J. P., Podkolzin, S. G., & Tian, F. (2017). Observation and Identification of an Atomic Oxygen Structure on Catalytic Gold Nanoparticles. Angewandte Chemie. https://doi.org/10.1002/ange.201706647
Ma, Y., Dai, X., Hong, T., Munk, G. B., Libera, M., Zhao, Y. A., … Tyagi, S. (2017). A NASBA on microgel-tethered molecular-beacon microarray for real-time microbial molecular diagnostics. The Analyst, 142(1), 147–155. https://doi.org/10.1039/C6AN02192A
Nie, M., Kalyon, D. M., Pochiraju, K., & Fisher, F. T. (2017). A controllable way to measure the interfacial strength between carbon nanotube and polymer using a nanobridge structure. Carbon, 116, 510–517. https://doi.org/10.1016/j.carbon.2017.02.014
Şahin, E., & Kalyon, D. M. (2017). The rheological behavior of a fast-setting calcium phosphate bone cement and its dependence on deformation conditions. Journal of the Mechanical Behavior of Biomedical Materials, 72, 252–260. https://doi.org/10.1016/j.jmbbm.2017.05.017
Senturk-Ozer, S., Aktas, S., He, J., Fisher, F. T., Kalyon, D. M., Ahmed F E, L. B. S. and H. R., … Lim C, T. E. and N. S. (2017). Nanoporous nanocomposite membranes via hybrid twin-screw extrusion—multijet electrospinning. Nanotechnology, 28(2), 025301. https://doi.org/10.1088/0957-4484/28/2/025301
Tian, F., Kaňka, J., Yang, F., Min, J., & Hammond, P. T. (2017). Role of silica nanoparticles in monitoring and prolonging release of drug-eluting polyelectrolyte coatings using long-period fiber grating platform. Sensors and Actuators B: Chemical, 252, 831–839. https://doi.org/10.1016/j.snb.2017.06.048
Tian, F., Li, X., Kanka, J., & Du, H. (2017). Fiber optic index sensor enhanced by gold nanoparticle assembly on long period grating. Optik - International Journal for Light and Electron Optics, 132, 445–449. https://doi.org/10.1016/j.ijleo.2016.12.059
Voloshchuk, N., Chen, L., Li, Q., & Liang, J. F. (2017). Peptide oligomers from ultra-short peptides using sortase. Biochemistry and Biophysics Reports, 10, 1–6. https://doi.org/10.1016/j.bbrep.2017.02.005
Wang, X., Kang, K., Chen, S., Du, R., & Yang, E.-H. (2017). Location-specific growth and transfer of arrayed MoS 2 monolayers with controllable size. 2D Materials, 4(2), 025093. https://doi.org/10.1088/2053-1583/aa6e69
Wang, Y., & Sukhishvili, S. A. (2017). All-Aqueous Nanoprecipitation: Spontaneous Formation of Hydrogen-Bonded Nanoparticles and Nanocapsules Mediated by Phase Separation of Poly( N -Isopropylacrylamide). Macromolecular Rapid Communications, 1700242. https://doi.org/10.1002/marc.201700242
Yang, F., Sukhishvili, S., Du, H., & Tian, F. (2017). Marine salinity sensing using long-period fiber gratings enabled by stimuli-responsive polyelectrolyte multilayers. Sensors and Actuators B: Chemical, 253, 745–751. https://doi.org/10.1016/j.snb.2017.06.121
Zhan, H., Jagtiani, T., & Liang, J. F. (2017). A new targeted delivery approach by functionalizing drug nanocrystals through polydopamine coating. European Journal of Pharmaceutics and Biopharmaceutics, 114, 221–229. https://doi.org/10.1016/j.ejpb.2017.01.020
Zhan, H., & Liang, J. F. (2017). Preparation and anticancer activity evaluation of an amorphous drug nanocomposite by simple heat treatment. Anti-Cancer Drugs, 1. https://doi.org/10.1097/CAD.0000000000000503
Zhan, H., Zhou, X., Cao, Y., Jagtiani, T., Chang, T.-L., Liang, J. F., … Kiricsi, M. (2017). Anti-cancer activity of camptothecin nanocrystals decorated by silver nanoparticles. J. Mater. Chem. B, 5(14), 2692–2701. https://doi.org/10.1039/C7TB00134G
Zhang, C., & Akcora, P. (2017). Evaporation controlled particle patterns in a polymer droplet. RSC Adv., 7(30), 18321–18326. https://doi.org/10.1039/C7RA01687E
Chen, H., Ohodnicki, P., Baltrus, J. P., Holcomb, G., Tylczak, J., Du, H., … Creighton, J. A. (2016). High-temperature stability of silver nanoparticles geometrically confined in the nanoscale pore channels of anodized aluminum oxide for SERS in harsh environments. RSC Adv., 6(90), 86930–86937. http://doi.org/10.1039/C6RA17725E
Chen, H., Tian, F., Liu, K., Kanka, J., & Du, H. (2016). Strategy and method for nanoporous cladding formation on silica optical fiber. Optics Letters, 41(12), 2831. http://doi.org/10.1364/OL.41.002831
Dauletbay, A., Braida, W., Nauryzbaev, M., & Kudreeva, L. (2016). Electrodeposition of Mo/MoOx thin film on nickel substrate from dimethyl-sulfoxide: Assessing electrolytic bath characteristics. Chemical Engineering Transactions, 47, 163–168. http://doi.org/10.3303/CET1647028
Hu, Y., Kanka, J., Liu, K., Yang, Y., Wang, H., & Du, H. (2016). Gold Nanoring-Enhanced Generation of Singlet Oxygen: An Intricate Correlation with Surface Plasmon Resonance and Polyelectrolyte Bilayers. RSC Adv. http://doi.org/10.1039/C6RA22814C
Iyer Ganapathi, J., Fisher, F. T., & Kalyon, D. M. (2016). Distributive mixing of carbon nanotubes in poly(caprolactone) via solution and melt processing: Viscoelasticity and crystallization behavior versus mixing indices. Journal of Polymer Science Part B: Polymer Physics. http://doi.org/10.1002/polb.24137
Li, B., & Liang, J. F. (2016). A linker approach to phospholipopeptides. European Journal of Lipid Science and Technology, 118(2), 273–278. http://doi.org/10.1002/ejlt.201400593
Liu, S., Senses, E., Jiao, Y., Narayanan, S., & Akcora, P. (2016). Structure and Entanglement Factors on Dynamics of Polymer-Grafted Nanoparticles. ACS Macro Letters, 569–573. http://doi.org/10.1021/acsmacrolett.6b00089
Lee, S., Feldman, J., & Lee, S. S. (2016). Nanoconfined Crystallization of MAPbI 3 to Probe Crystal Evolution and Stability. Crystal Growth & Design, 16(8), 4744–4751. http://doi.org/10.1021/acs.cgd.6b00801
Luo, Y., Li, X., Zhang, X., Prybolsky, S., Shepard, G. D., & Strauf, S. (2016). Tunable multipole resonances in plasmonic crystals made by four-beam holographic lithography. Applied Physics Letters, 108(5), 53105. http://doi.org/10.1063/1.4941401
Ma, Y., & Libera, M. (2016). Molecular Crowding Effects on Microgel-Tethered Oligonucleotide Probes. Langmuir.
Mahjour, S. B., Sefat, F., Polunin, Y., Wang, L., & Wang, H. (2016). Improved cell infiltration of electrospun nanofiber mats for layered tissue constructs. Journal of Biomedical Materials Research. Part A. http://doi.org/10.1002/jbm.a.35676
Patel, R. B., Chou, T., Kanwal, A., Apigo, D. J., Lefebvre, J., Owens, F., … Chen, Y. (2016). Boron-Filled Hybrid Carbon Nanotubes. Scientific Reports, 6, 30495. http://doi.org/10.1038/srep30495
Senses, E., Faraone, A., Akcora, P., Gusev, A. A., Sternstein, S., Zhu, A.-J., … Azuah, R. T. (2016). Microscopic Chain Motion in Polymer Nanocomposites with Dynamically Asymmetric Interphases. Scientific Reports, 6, 29326. http://doi.org/10.1038/srep29326
Wang, H., Black, C. T., & Akcora, P. (2016). Elastic Properties of Protein Functionalized Nanoporous Polymer Films. Langmuir : The ACS Journal of Surfaces and Colloids, 32(1), 151–8. http://doi.org/10.1021/acs.langmuir.5b04334
Wang, Y., Chou, T., & Sukhishvili, S. A. (2016). Spontaneous, One-Pot Assembly of pH-Responsive Hydrogen-Bonded Polymer Capsules. ACS Macro Letters, 5(1), 35–39. http://doi.org/10.1021/acsmacrolett.5b00716
Wang, Y., & Sukhishvili, S. (2016). Hydrogen-bonded polymer complexes and nanocages of weak polyacids templated by a Pluronic block copolymer. Soft Matter. http://doi.org/10.1039/C6SM01869F
Xu, J., Palumbo, A., Xu, W., & Yang, E.-H. (2016). Effects of Electropolymerization Parameters of PPy(DBS) Surfaces on the Droplet Flattening Behaviors During Redox. The Journal of Physical Chemistry B, acs.jpcb.6b05698. http://doi.org/10.1021/acs.jpcb.6b05698
Xu, W., Xu, J., Li, X., Tian, Y., Choi, C.-H., & Yang, E.-H. (2016). Lateral actuation of an organic droplet on conjugated polymer electrodes via imbalanced interfacial tensions. Soft Matter. http://doi.org/10.1039/C6SM01223J
Xu, Z., Meng, X., Zhang, Y., & Li, F. (2016). Effects and mechanisms of water matrix on surface-enhanced Raman scattering analysis of arsenite on silver nanofilm. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 497, 117–125. http://doi.org/10.1016/j.colsurfa.2016.02.042
Xue-Ning, C., Hong-Song, F., & Hong-Jun, W. (2016). Effect of Phase Composition of Calcium Phosphate (CaP) on Bioactivity of Osteon-like Composite Scaffolds. Journal of Inorganic Materials, 31(1), 107. http://doi.org/10.15541/jim20150366
Zhan, H., Jagtiani, T., & Liang, J. F. (2016). Enhanced anticancer activity of drug nanoparticles formulated with β-cyclodextrin. Anti-Cancer Drugs, 1. http://doi.org/10.1097/CAD.0000000000000458
Zhan, H., & Liang, J. F. (2016). Extreme Activity of Drug Nanocrystals Coated with A Layer of Non-Covalent Polymers from Self-Assembled Boric Acid. Scientific Reports, 6, 38668. http://doi.org/10.1038/srep38668
Chen, H., Tian, F., Kanka, J., & Du, H. (2015). A scalable pathway to nanostructured sapphire optical fiber for evanescent-field sensing and beyond. Applied Physics Letters, 106(11), 111102. http://doi.org/10.1063/1.4915325
Chen, L., & Liang, J. F. (2014). The Potential Roles of Cell Surface pHs in Bioactive Peptide Activation. Chemical Biology & Drug Design, 85(2), 208–15. http://doi.org/10.1111/cbdd.12374
Chen, T., Pal, A., Gao, J., Han, Y., Chen, H., Sukhishvili, S. A., … Podkolzin, S. G. (2015). Identification of Vertical and Horizontal Configurations for BPE Adsorption on Silver Surfaces. The Journal of Physical Chemistry C, 150929190246004. http://doi.org/10.1021/acs.jpcc.5b07831
da Silva Domingues, J. F., Roest, S., Wang, Y., van der Mei, H. C., Libera, M., van Kooten, T. G., & Busscher, H. J. (2015). Macrophage phagocytic activity toward adhering staphylococci on cationic and patterned hydrogel coatings versus common biomaterials. Acta Biomaterialia. http://doi.org/10.1016/j.actbio.2015.02.028
Firlar, E., Libera, M., Ilarslan, H., & Misra, M. (2015). Corneodesmosomal water content in frozen-hydrated porcine skin. The Journal of Investigative Dermatology, 135(6), 1689–91. http://doi.org/10.1038/jid.2015.31
Gu, Y., Zhang, W., Sun, Q., Hao, Y., Zilberberg, J., & Lee, W. Y. (2015). Microbead-guided reconstruction of the 3D osteocyte network during microfluidic perfusion culture. J. Mater. Chem. B, 3(17), 3625–3633. http://doi.org/10.1039/C5TB00421G
He, B., Stepanov, V., Qiu, H., & Krasnoperov, L. N. (2015). Production and Characterization of Composite Nano-RDX by RESS Co-Precipitation. Propellants, Explosives, Pyrotechnics, n/a-n/a. http://doi.org/10.1002/prep.201400249
Hu, Y., Yang, Y., Wang, H., & Du, H. (2015). Synergistic Integration of Layer-by-Layer Assembly of Photosensitizer and Gold Nanorings for Enhanced Photodynamic Therapy in the Near Infrared. ACS Nano. http://doi.org/10.1021/acsnano.5b03063
Jeong, C., Lee, J., Sheppard, K., & Choi, C.-H. (2015). Air-Impregnated Nanoporous Anodic Aluminum Oxide Layers for Enhancing the Corrosion Resistance of Aluminum. Langmuir : The ACS Journal of Surfaces and Colloids. http://doi.org/10.1021/acs.langmuir.5b02392
Jiao, Y., Chou, T., & Akcora, P. (2015). Design of Ion-Containing Polymer-Grafted Nanoparticles for Conductive Membranes. Macromolecules, 48(14), 150710061448002. http://doi.org/10.1021/acs.macromol.5b00758
Jordache, M. K., & Du, H. (2015). High-temperature alkali corrosion of Kyocera SN282 silicon nitride. Corrosion Science, 91, 68–74. http://doi.org/10.1016/j.corsci.2014.10.050
Kahraman, H. T., Gevgilili, H., Pehlivan, E., & Kalyon, D. M. (2015). Development of an epoxy based intumescent system comprising of nanoclays blended with appropriate formulating agents. Progress in Organic Coatings, 78, 208–219. http://doi.org/10.1016/j.porgcoat.2014.09.002
Lu, Y., Wu, Y., Liang, J., Libera, M. R., & Sukhishvili, S. A. (2015). Self-defensive antibacterial layer-by-layer hydrogel coatings with pH-triggered hydrophobicity. Biomaterials, 45, 64–71. http://doi.org/10.1016/j.biomaterials.2014.12.048
Mahjour, S. B., Fu, X., Yang, X., Fong, J., Sefat, F., & Wang, H. (2015). Rapid creation of skin substitutes from human skin cells and biomimetic nanofibers for acute full-thickness wound repair. Burns : Journal of the International Society for Burn Injuries. http://doi.org/10.1016/j.burns.2015.06.011
Nie, M., Kalyon, D. M., & Fisher, F. T. (2015). Reverse Kebab Structure Formed inside Carbon Nanofibers via Nanochannel Flow. Langmuir : The ACS Journal of Surfaces and Colloids, 31(36), 10047–55. http://doi.org/10.1021/acs.langmuir.5b02042
Patel, R. B., Chou, T., & Iqbal, Z. (2015). Synthesis of Boron Nanowires, Nanotubes, and Nanosheets. Journal of Nanomaterials, 2015, 1–7. http://doi.org/10.1155/2015/243925
Pinkhasova, P., Chen, H., Kanka, J., Mergo, P., & Du, H. (2015). Nanotag-enabled photonic crystal fiber as quantitative surface-enhanced Raman scattering optofluidic platform. Applied Physics Letters, 106(7), 71106. http://doi.org/10.1063/1.4913246
Qiu, H., Patel, R. B., Damavarapu, R. S., & Stepanov, V. (2015). Nanoscale 2CL-20∙HMX High Explosive Cocrystal by Bead Milling. CrystEngComm. http://doi.org/10.1039/C5CE00489F
Qiu, H., Stepanov, V., Di Stasio, A. R., Surapaneni, A., & Lee, W. Y. (2015). Investigation of the crystallization of RDX during spray drying. Powder Technology, 274, 333–337. http://doi.org/10.1016/j.powtec.2015.01.032
Senses, E., Isherwood, A., & Akcora, P. (2015). Reversible Thermal Stiffening in Polymer Nanocomposites. ACS Applied Materials & Interfaces. http://doi.org/10.1021/acsami.5b02046
Sun, Q., Gu, Y., Zhang, W., Dziopa, L., Zilberberg, J., & Lee, W. (2015). Ex vivo 3D osteocyte network construction with primary murine bone cells. Bone Research, 3, 15026. http://doi.org/10.1038/boneres.2015.26
Traba, C., & Liang, J. F. (2015). Bacteria responsive antibacterial surfaces for indwelling device infections. Journal of Controlled Release : Official Journal of the Controlled Release Society, 198C, 18–25. http://doi.org/10.1016/j.jconrel.2014.11.025
Xu, W., Xu, J., Choi, C.-H., & Yang, E.-H. (2015). In Situ Control of Underwater-Pinning of Organic Droplets on a Surfactant-Doped Conjugated Polymer Surface. ACS Applied Materials & Interfaces, 7(46), 25608–25617. http://doi.org/10.1021/acsami.5b07589
Yang, Y., Gao, N., Hu, Y., Jia, C., Chou, T., Du, H., & Wang, H. (2015). Gold nanoparticle-enhanced photodynamic therapy: effects of surface charge and mitochondrial targeting. Therapeutic Delivery, 6(3), 307–21. http://doi.org/10.4155/tde.14.115
Zhang, W., Gu, Y., Hao, Y., Sun, Q., Konior, K., Wang, H., … Lee, W. (2015). Well Plate-Based Perfusion Culture Device for 3D Tissue and Tumor Microenvironment Replication. Lab Chip, 15(13), 2854–2863. http://doi.org/10.1039/C5LC00341E
Zhuk, A., Selin, V., Zhuk, I., Belov, B., Ankner, J. F., & Sukhishvili, S. A. (2015). Chain Conformation and Dynamics in Spin-Assisted Weak Polyelectrolyte Multilayers. Langmuir : The ACS Journal of Surfaces and Colloids. http://doi.org/10.1021/acs.langmuir.5b00401
Aktas, S., Kalyon, D. M., Marín-Santibáñez, B. M., & Pérez-González, J. (2014). Shear viscosity and wall slip behavior of a viscoplastic hydrogel. Journal of Rheology, 58(2), 513–535. doi:10.1122/1.4866295
Du, K., Wathuthanthri, I., Liu, Y., Kang, Y. T., & Choi, C.-H. (2014). Fabrication of polymer nanowires via maskless O2 plasma etching. Nanotechnology, 25(16), 165301. doi:10.1088/0957-4484/25/16/165301
Fu, X. . b c, Xu, M. ., Liu, J. ., Qi, Y. ., Li, S. ., & Wang, H. . (2014). Regulation of migratory activity of human keratinocytes by topography of multiscale collagen-containing nanofibrous matrices. Biomaterials, 35(5), 1496–1506. doi:10.1016/j.biomaterials.2013.11.013
Iqbal, Z., Chou, T., & Patel, R. B. (2014). Nanoheterostructures containing boron and nitrogen. Emerging Materials Research, 1–18. doi:10.1680/emr.14.00001
Jiao, Y., & Akcora, P. (2014). Accelerated brush growth on nanoparticle surfaces by reversible addition-fragmentation chain transfer polymerization. Journal of Polymer Science Part A: Polymer Chemistry, n/a–n/a. doi:10.1002/pola.27170
Jiao, Y., Parra, J., & Akcora, P. (2014). Effect of Ionic Groups on Polymer-Grafted Magnetic Nanoparticle Assemblies. Macromolecules, 47(6), 2030–2036. doi:10.1021/ma402509b
Jiao, Y., Senses, E., & Akcora, P. (2014). Mechanical behavior of polymer-grafted iron oxide nano particles under large shear deformation. Bulletin of the American Physical Society, Volume 59,. Retrieved from http://meetings.aps.org/Meeting/MAR14/Event/213359
Jiao, Y., Yevelev, A., Parra, J., & Akcora, P. (2014). Sulfonated Poly(styrene) Chains Grafted on Magnetic Nanoparticles. Bulletin of the American Physical Society, Volume 59,. Retrieved from http://meetings.aps.org/Meeting/MAR14/Event/213826
Lee, P., Tran, K., Chang, W., Shelke, N. B., Kumbar, S. G., & Yu, X. (2014). Influence of Chondroitin Sulfate and Hyaluronic Acid Presence in Nanofibers and Its Alignment on the Bone Marrow Stromal Cells: Cartilage Regeneration. Journal of Biomedical Nanotechnology, 10(8), 1469–1479. doi:10.1166/jbn.2014.1831
Meng, X., Vaccari, D. A., Zhang, J., Fiume, A., & Meng, X. (2014). Bioregeneration of spent anion exchange resin for treatment of nitrate in water. Environmental Science & Technology, 48(3), 1541–8. doi:10.1021/es4043534
Senses, E., & Akcora, P. (2014). Effect of interfacial entanglement density on the melt and glassy properties of attractive polymer nanocomposites. Bulletin of the American Physical Society, Volume 59,. Retrieved from http://meetings.aps.org/Meeting/MAR14/Session/G19.6
Senses, E., Jiao, Y., & Akcora, P. (2014). Modulating interfacial attractions of polymer-grafted nanoparticles in melts under shear. Soft Matter. doi:10.1039/c4sm00460d
Wang, Q., & Libera, M. (2014). Microgel-modified surfaces enhance short-term osteoblast response. Colloids and Surfaces. B, Biointerfaces, 118, 202–9. doi:10.1016/j.colsurfb.2014.04.002
Wang, Y., da Silva Domingues, J. F., Subbiahdoss, G., van der Mei, H. C., Busscher, H. J., & Libera, M. (2014). Conditions of lateral surface confinement that promote tissue-cell integration and inhibit biofilm growth. Biomaterials, 35(21), 5446–52. doi:10.1016/j.biomaterials.2014.03.057
Zhang, J. ., Terracciano, A. ., & Meng, X. . (2014). Comment on “colloidal properties and stability of graphene oxide nanomaterials in the aquatic environment.” Environmental Science and Technology, 48(2), 1359. doi:10.1021/es404912p
Bartolucci, S. F. ., Mago, G. ., Fisher, F. T. ., Troiano, E. ., & Kalyon, D. M. . (2012). Unusual fracture surface morphology of fatigued carbon nanofiber/poly(ether ether ketone) composites. Carbon, 50(6), 2359–2361. doi:10.1016/j.carbon.2012.01.034
Chen, L., Dong, S., & Liang, J. F. (2013). The effects of metal ions on the cytotoxicity and selectivity of a histidine-containing lytic peptide. International Journal of Peptide Research and Therapeutics, 19(3), 239–244. doi:10.1007/s10989-013-9344-1
Chen, L., & Liang, J. F. (2013). Peptide fibrils with altered stability, activity, and cell selectivity. Biomacromolecules, 14(7), 2326–2331. doi:10.1021/bm400618m
Chen, X. ., Ergun, A. ., Gevgilili, H. ., Ozkan, S. ., Kalyon, D. M. . b b, & Wang, H. . (2013). Shell-core bi-layered scaffolds for engineering of vascularized osteon-like structures. Biomaterials, 34(33), 8203–8212. doi:10.1016/j.biomaterials.2013.07.035
Du, K., Liu, Y., Wathuthanthri, I., & Choi, C.-H. (2013). Fabrication of hierarchical nanostructures using free-standing trilayer membrane. Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures, 31(6). doi:10.1116/1.4821655
El Mel, A.-A., Buffière, M., Tessier, P.-Y., Konstantinidis, S., Xu, W., Du, K., … Snyders, R. (2013). Highly ordered hollow oxide nanostructures: the Kirkendall effect at the nanoscale. Small (Weinheim an Der Bergstrasse, Germany), 9(17), 2838–43. doi:10.1002/smll.201202824
Hu, Y. ., Yang, Y. ., Wang, H. ., & Du, H. . (2013). Colloidal gold nanorings for improved photodynamic therapy through field-enhanced generation of reactive oxygen species. In Progress in Biomedical Optics and Imaging - Proceedings of SPIE (Vol. 8595). San Francisco, CA. doi:10.1117/12.2001155
Junka, R. ., Valmikinathan, C. M. . c, Kalyon, D. M. . b, & Yu, X. . (2013). Laminin functionalized biomimetic nanofibers for nerve tissue engineering. Journal of Biomaterials and Tissue Engineering, 3(4), 494–502. doi:10.1166/jbt.2013.1110
Kim, Y.-S., Kumar, K., Li, X., Fisher, F. T., & Yang, E.-H. (2013). Fabrication and characterization of 3-D Graphene-CNT architectures towards supercapacitor applications. In Technical Proceedings of the 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013 (Vol. 1, pp. 228–230). Washington, DC. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84881085793&partnerID=40&md5=583e00e2b29334d04d6835ee120e8838
Küçük, I. . b, Gevgilili, H. ., & Kalyon, D. M. . (2013). Effects of dispersion and deformation histories on rheology of semidilute and concentrated suspensions of multiwalled carbon nanotubes. Journal of Rheology, 57(5), 1491–1514. doi:10.1122/1.4819745
Kumar, K., Kim, Y.-S., Li, X., Ding, J., Fisher, F. T., & Yang, E.-H. (2013). Chemical vapor deposition of carbon nanotubes on monolayer graphene substrates: Reduced etching via suppressed catalytic hydrogenation using C 2H4. Chemistry of Materials, 25(19), 3874–3879. doi:10.1021/cm402052z
Kumar, K., Kim, Y.-S., Tian, Y., Li, X., Pallikaras, A., & Yang, E. H. (2013). The effect of thermal annealing processes on graphene. In Technical Proceedings of the 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013 (Vol. 1, pp. 245–248). Washington, DC. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84881111381&partnerID=40&md5=01a5a1a15b627f1e160f9e376d537370
Kumar, K., Kim, Y.-S., & Yang, E.-H. (2013). The influence of thermal annealing to remove polymeric residue on the electronic doping and morphological characteristics of graphene. Carbon, 65, 35–45. doi:10.1016/j.carbon.2013.07.088
Kumar, K., & Yang, E.-H. (2013). On the growth mode of two-lobed curvilinear graphene domains at atmospheric pressure. Scientific Reports, 3. doi:10.1038/srep02571
Li, J. ., Chen, X. ., Xu, W. ., Nam, C.-Y. ., & Shi, Y. . (2013). TiO2 nanofiber solid-state dye sensitized solar cells with thin TiO2 hole blocking layer prepared by atomic layer deposition. Thin Solid Films, 536, 275–279. doi:10.1016/j.tsf.2013.03.029
Lu, Y. ., Zhuk, A. ., Xu, L. ., Liang, X. ., Kharlampieva, E. ., & Sukhishvili, S. A. . (2013). Tunable pH and temperature response of weak polyelectrolyte brushes: Role of hydrogen bonding and monomer hydrophobicity. Soft Matter, 9(22), 5464–5472. doi:10.1039/c3sm50268f
Lu, Y., Sarshar, M. A., Du, K., Chou, T., Choi, C.-H., & Sukhishvili, S. A. (2013). Large-Amplitude, Reversible, pH-Triggered Wetting Transitions Enabled by Layer-by-Layer Films. ACS Applied Materials & Interfaces, 5(23), 12617–12623.
Nie, M., & Fisher, F. T. (2013). A nano-hybrid shish kebab approach to modifying the interface in carbon nanotube - Semicrystalline polymer nanocomposites. In 28th Annual Technical Conference of the American Society for Composites 2013, ASC 2013 (Vol. 2, pp. 1804–1814). State College, PA. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84892914665&partnerID=40&md5=2cd04d3a00b1b17657a144416b0e40c4
Pesirikan, N. ., Chang, W. ., Zhang, X. ., Xu, J. ., & Yu, X. . (2013). Characterization of schwann cells in self-assembled sheets from thermoresponsive substrates. Tissue Engineering - Part A, 19(13-14), 1601–1609. doi:10.1089/ten.tea.2012.0516
Pinkhasova, P. ., Chen, H. ., Verhoeven, M. W. G. M. ., Sukhishvili, S. ., & Du, H. . (2013). Thermally annealed Ag nanoparticles on anodized aluminum oxide for SERS sensing. RSC Advances, 3(39), 17954–17961. doi:10.1039/c3ra43808b
Sarpkaya, I. ., Zhang, Z. ., Walden-Newman, W. ., Wang, X. ., Hone, J. ., Wong, C. W. ., & Strauf, S. . (2013). Prolonged spontaneous emission and dephasing of localized excitons in air-bridged carbon nanotubes. Nature Communications, 4. doi:10.1038/ncomms3152
Senses, E. ., Black, M. ., Cunningham, T. ., Sukhishvili, S. A. ., & Akcora, P. . (2013). Spatial ordering of colloids in a drying aqueous polymer droplet. Langmuir, 29(8), 2588–2594. doi:10.1021/la400032u
Senses, E., & Akcora, P. (2013). An Interface-Driven Stiffening Mechanism in Polymer Nanocomposites. Macromolecules, 46(5), 1868–1874. doi:10.1021/ma302275f
Senses, E., & Akcora, P. (2013). Mechanistic model for deformation of polymer nanocomposite melts under large amplitude shear. Journal of Polymer Science, Part B: Polymer Physics, 51(9), 764–771. doi:10.1002/polb.23247
Shi, Y., Selin, V., Wang, Y., & Sukhishvili, S. A. (2013). Multiresponsive block copolymer-modified “hairy” gold nanoparticles for remote control of interfaces. Particle and Particle Systems Characterization, 30(11), 950–957. doi:10.1002/ppsc.201300220
Traba, C., Chen, L., Liang, D., Azzam, R., & Liang, J. F. (2013). Insights into discharge argon-mediated biofilm inactivation. Biofouling, 29(10), 1205–1213. doi:10.1080/08927014.2013.832222
Traba, C., Chen, L., & Liang, J. F. (2013). Low power gas discharge plasma mediated inactivation and removal of biofilms formed on biomaterials. Current Applied Physics, 13(SUPPL.1), S12–S18. doi:10.1016/j.cap.2012.12.024
Wang, Q. ., Yu, X. ., & Libera, M. . (2013). Reducing Bacterial Colonization of 3-D Nanofiber Cell Scaffolds by Hierarchical Assembly of Microgels and an Antimicrobial Peptide. Advanced Healthcare Materials, 2(5), 687–691. doi:10.1002/adhm.201200306
Wang, Y., Firlar, E., Dai, X., & Libera, M. (2013). Poly(ethylene glycol) as a biointeractive electron-beam resist. Journal of Polymer Science, Part B: Polymer Physics, 51(21), 1543–1554. doi:10.1002/polb.23367
Wathuthanthri, I., Liu, Y., Du, K., Xu, W., & Choi, C.-H. (2013). Simple holographic patterning for high-aspect-ratio three-dimensional nanostructures with large coverage area. Advanced Functional Materials, 23(5), 608–618. doi:10.1002/adfm.201201814
Wu, Y., Wang, Q., & Libera, M. (2013). PEG-based microgels to modify biomaterials surfaces. Macromolecular Symposia, 329(1), 35–40. doi:10.1002/masy.201200106
Xiao, R., & Wazne, M. (2013). Assessment of aged biodegradable polymer-coated nano-zero-valent iron for degradation of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). Journal of Chemical Technology and Biotechnology, 88(4), 711–718. doi:10.1002/jctb.3889
Xu, L. ., Selin, V. ., Zhuk, A. ., Ankner, J. F. ., & Sukhishvili, S. A. . (2013). Molecular weight dependence of polymer chain mobility within multilayer films. ACS Macro Letters, 2(10), 865–868. doi:10.1021/mz400413v
Xu, W. ., Leeladhar, R. ., Kang, Y. T. ., & Choi, C.-H. . b. (2013). Evaporation kinetics of sessile water droplets on micropillared superhydrophobic surfaces. Langmuir, 29(20), 6032–6041. doi:10.1021/la400452e
Xu, W. ., Li, J. ., Zhang, G. ., Chen, X. ., Galos, R. ., Hadim, H. ., … Shi, Y. . (2013). A low-cost MEMS tester for measuring single nanostructure’s thermal conductivity. Sensors and Actuators, A: Physical, 191, 89–98. doi:10.1016/j.sna.2012.11.037
Xu, W., Tian, Y., Bisaria, H., Ahn, P., Choi, C.-H., & Yang, E.-H. (2013). Transportation of a liquid droplet at ultra-low voltages by tunable wetting on conjugated polymer electrodes. In 2013 Transducers and Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS and EUROSENSORS 2013 (pp. 2185–2188). Barcelona. doi:10.1109/Transducers.2013.6627236
Xu, W., Tian, Y., Bisaria, H., Ahn, P., Li, X., Tsai, Y.-T., … Yang, E.-H. (2013). A low-voltage droplet manipulation via tunable wetting on a polypyrrole(DBS) surface. In Technical Proceedings of the 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013 (Vol. 2, pp. 322–325). Washington, DC. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84881116339&partnerID=40&md5=c701434f8faa05d58930476bc65691dc
Zhang, X., & Strauf, S. (2013). Formation of triplet and quadruplet plasmonic nanoarray templates by holographic lithography. Applied Physics Letters, 102(9). doi:10.1063/1.4794840
Zhu, Z., Gao, N., Wang, H., & Sukhishvili, S. A. (2013). Temperature-triggered on-demand drug release enabled by hydrogen-bonded multilayers of block copolymer micelles. Journal of Controlled Release, 171(1), 73–80. doi:10.1016/j.jconrel.2013.06.031
Zhuk, A. ., Xu, L. ., Ankner, J. F. ., & Sukhishvili, S. A. . (2013). Selective water uptake within micelle-containing layer-by-layer films of various architectures: A neutron reflectometry study. Soft Matter, 9(2), 410–417. doi:10.1039/c2sm26583d
Zhuk, A., & Sukhishvili, S. A. (2013). Stimuli-responsive layer-by-layer nanocomposites. Soft Matter, 9(21), 5149–5154. doi:10.1039/c3sm00071k
Bassim, N. D., De Gregorio, B. T., Kilcoyne, A. L. D., Scott, K., Chou, T., Wirick, S., … Stroud, R. M. (2012). Minimizing damage during FIB sample preparation of soft materials. Journal of Microscopy, 245(3), 288–301.
Chen, L., & Liang, J. F. (2012). Metabolic monosaccharides altered cell responses to anticancer drugs. European Journal of Pharmaceutics and Biopharmaceutics, 81(2), 339–345. doi:10.1016/j.ejpb.2012.03.012
Chen, L., Patrone, N., & Liang, J. F. (2012). Peptide self-assembly on cell membranes to induce cell lysis. Biomacromolecules, 13(10), 3327–3333. doi:10.1021/bm301106p
Chen, L., Tu, Z., Voloshchuk, N., & Liang, J. F. (2012). Lytic peptides with improved stability and selectivity designed for cancer treatment. Journal of Pharmaceutical Sciences, 101(4), 1508–1517. doi:10.1002/jps.23043
Chen, X. ., Xu, S. ., Yao, N. ., & Shi, Y. . (2012). Young’s modulus determination of unpolled electrospun PZT nanofibers. Science of Advanced Materials, 4(8), 847–850. doi:10.1166/sam.2012.1355
Chen, X., & Shi, Y. (2012). Characterization of piezoelectric nanofiber composites acoustic emission sensor for structure health monitoring. In Proceedings of the ASME Design Engineering Technical Conference (Vol. 5, pp. 247–251). Chicago, IL. doi:10.1115/DETC2012-71538
Chou, T., & Hsia, R. (2012). Correlate LM and FIB-SEM to Study Chlamydia Infection. Microscopy and Microanalysis, 18(S2), 536–537.
Chou, T., Wang, Q., Libera, M., & Uzunoglu, E. (2012). Using Cryo FIB-SEM to Study Three-Dimensional Biofilm Structure. Microscopy and Microanalysis, 18(S2), 626–627.
Dai, X. ., Yang, W. ., Firlar, E. ., Marras, S. A. E. ., & Libera, M. . (2012). Surface-patterned microgel-tethered molecular beacons. Soft Matter, 8(11), 3067–3076. doi:10.1039/c1sm06702h
Du, K., Liu, Y., Wathuthanthri, I., & Choi, C.-H. (2012). Dual applications of free-standing holographic nanopatterns for lift-off and stencil lithography. Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures, 30(6). doi:10.1116/1.4757110
Du, K., Wathuthanthri, I., Liu, Y., Xu, W., & Choi, C.-H. (2012). Wafer-scale pattern transfer of metal nanostructures on polydimethylsiloxane (PDMS) substrates via holographic nanopatterns. ACS Applied Materials and Interfaces, 4(10), 5505–5514. doi:10.1021/am301423s
Egerton, R. F. . F., Lazar, S. . c, & Libera, M. . (2012). Delocalized radiation damage in polymers. Micron, 43(1), 2–7. doi:10.1016/j.micron.2011.05.007
Ergun, A. ., Chung, R. ., Ward, D. ., Valdevit, A. ., Ritter, A. ., & Kalyon, D. M. . b b. (2012). Unitary bioresorbable cage/core bone graft substitutes for spinal arthrodesis coextruded from polycaprolactone biocomposites. Annals of Biomedical Engineering, 40(5), 1073–1087. doi:10.1007/s10439-011-0484-1
Ergun, A. ., Yu, X. ., Valdevit, A. ., Ritter, A. ., & Kalyon, D. M. . b b. (2012). Radially and axially graded multizonal bone graft substitutes targeting critical-sized bone defects from polycaprolactone/hydroxyapatite/tricalcium phosphate. Tissue Engineering - Part A, 18(23-24), 2426–2436. doi:10.1089/ten.tea.2011.0625
Fu, X., & Wang, H. (2012). Spatial arrangement of polycaprolactone/collagen nanofiber scaffolds regulates the wound healing related behaviors of human adipose stromal cells. Tissue Engineering - Part A, 18(5-6), 631–642. doi:10.1089/ten.tea.2011.0069
Gu, Y. ., Chen, X. ., Lee, J.-H. ., Monteiro, D. A. ., Wang, H. ., & Lee, W. Y. . (2012). Inkjet printed antibiotic- and calcium-eluting bioresorbable nanocomposite micropatterns for orthopedic implants. Acta Biomaterialia, 8(1), 424–431. doi:10.1016/j.actbio.2011.08.006
Hao, J. . c, Han, M.-J. ., Li, J. ., & Meng, X. . (2012). Surface modification of silver nanofilms for improved perchlorate detection by surface-enhanced Raman scattering. Journal of Colloid and Interface Science, 377(1), 51–57. doi:10.1016/j.jcis.2012.03.036
Hom, N., Mehta, K. R., Chou, T., Foraker, A. B., Brodsky, F. M., Kirshenbaum, K., & Montclare, J. K. (2012). Anisotropic nanocrystal arrays organized on protein lattices formed by recombinant clathrin fragments. Journal of Materials Chemistry, 22(44), 23335–23339.
Ihnen, A. C., Petrock, A. M., Chou, T., Fuchs, B. E., & Lee, W. Y. (2012). Organic nanocomposite structure tailored by controlling droplet coalescence during inkjet printing. ACS Applied Materials & Interfaces, 4(9), 4691–9. doi:10.1021/am301050n
Jagupilla, S. C. ., Grubb, D. G. ., & Wazne, M. . (2012a). Immobilization of Sb(III) and Sb(V) using steel slag fines. In Geotechnical Special Publication (pp. 3988–3994). Oakland, CA. doi:10.1061/9780784412121.409
Jagupilla, S. C. ., Grubb, D. G. ., & Wazne, M. . (2012b). Metals immobilization and removal rates of Se(IV) and Se(VI) by steel slag fines media. In Geotechnical Special Publication (pp. 4033–4041). Oakland, CA. doi:10.1061/9780784412121.414
Jeong, C., & Choi, C.-H. (2012). Single-step direct fabrication of pillar-on-pore hybrid nanostructures in anodizing aluminum for superior superhydrophobic efficiency. ACS Applied Materials and Interfaces, 4(2), 842–848. doi:10.1021/am201514n
Jiao, Y., & Akcora, P. (2012). Assembly of polymer-grafted magnetic nanoparticles in polymer melts. Macromolecules, 45(8), 3463–3470. doi:10.1021/ma3000576
Keller, K. ., Amirian, A. ., & Akcora, P. . (2012). Elastic properties of a protein-polymer-grafted surface. Langmuir, 28(8), 3807–3813. doi:10.1021/la204773u
Kim, Y.-S., Kumar, K., Fisher, F. T., & Yang, E.-H. (2012). Out-of-plane growth of CNTs on graphene for supercapacitor applications. Nanotechnology, 23(1). doi:10.1088/0957-4484/23/1/015301
Kong, D. ., Le, L. T. ., Li, Y. ., Zunino, J. L. ., & Lee, W. . (2012). Temperature-dependent electrical properties of graphene inkjet-printed on flexible materials. Langmuir, 28(37), 13467–13472. doi:10.1021/la301775d
Liu, Y. ., Xin, J. H. ., & Choi, C.-H. . (2012). Cotton fabrics with single-faced superhydrophobicity. Langmuir, 28(50), 17426–17434. doi:10.1021/la303714h
Liu, Y., Du, K., Wathuthanthri, I., & Choi, C.-H. (2012). From nanocone to nanodisc: Structural transformation of gold nanoarrays via simple mechanical stresses. Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures, 30(6). doi:10.1116/1.4765635
Liu, Y., Du, K., Wathuthanthri, I., Xu, W., & Choi, C.-H. (2012). 3-D nanofabrication using nanostructured photoresist film as free-standing appliqué. In Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS) (pp. 192–195). Paris. doi:10.1109/MEMSYS.2012.6170149
Malasavage, N. E. ., Jagupilla, S. ., Grubb, D. . d, Wazne, M. ., & Coon, W. P. . (2012). Geotechnical performance of dredged material-steel slag fines blends: Laboratory and field evaluation. Journal of Geotechnical and Geoenvironmental Engineering, 138(8), 981–991. doi:10.1061/(ASCE)GT.1943-5606.0000658981-991.pdf
Mentbayeva, A. ., Ospanova, A. ., Tashmuhambetova, Z. ., Sokolova, V. ., & Sukhishvili, S. . (2012). Polymer-metal complexes in polyelectrolyte multilayer films as catalysts for oxidation of toluene. Langmuir, 28(32), 11948–11955. doi:10.1021/la3025342
Pavlukhina, S. V. ., Kaplan, J. B. ., Xu, L. ., Chang, W. ., Yu, X. ., Madhyastha, S. ., … Sukhishvili, S. A. . (2012). Noneluting enzymatic antibiofilm coatings. ACS Applied Materials and Interfaces, 4(9), 4708–4716. doi:10.1021/am3010847
Pinkhasova, P. ., Yang, L. ., Zhang, Y. ., Sukhishvili, S. ., & Du, H. . (2012). Differential SERS activity of gold and silver nanostructures enabled by adsorbed poly(vinylpyrrolidone). Langmuir, 28(5), 2529–2535. doi:10.1021/la2047992
Pinkhasova, P., Puccio, B., Chou, T., Sukhishvili, S., & Du, H. (2012). Noble metal nanostructure both as a SERS nanotag and an analyte probe. Chemical Communications. doi:10.1039/c2cc35173k
Qiu, H., Stepanov, V., Chou, T., Surapaneni, A., Di Stasio, A. R., & Lee, W. Y. (2012). Single-step production and formulation of HMX nanocrystals. Powder Technology, 226, 235–238.
Shepard, K. B. . d, Gevgilili, H. ., Ocampo, M. . e, Li, J. . f, Fisher, F. T. ., & Kalyon, D. M. . (2012). Viscoelastic behavior of poly(ether imide) incorporated with multiwalled carbon nanotubes. Journal of Polymer Science, Part B: Polymer Physics, 50(21), 1504–1514. doi:10.1002/polb.23151
Tian, F. ., Kanka, J. ., Sukhishvili, S. A. ., & Du, H. . (2012). Photonic crystal fiber for layer-by-layer assembly and measurements of polyelectrolyte thin films. Optics Letters, 37(20), 4299–4301. doi:10.1364/OL.37.004299
Wang, Q., Chou, T., & Libera, M. (2012). Inhibiting Staphylococcal Biofilm Formation Using Self-Assembled Microgels. Microscopy and Microanalysis, 18(S2), 6–7.
Wang, Y. . b, Subbiahdoss, G. ., de Vries, J. ., Libera, M. ., van der Mei, H. C. ., & Busscher, H. J. . (2012). Effect of adsorbed fibronectin on the differential adhesion of osteoblast-like cells and Staphylococcus aureus with and without fibronectin-binding proteins. Biofouling, 28(9), 1011–1021. doi:10.1080/08927014.2012.725471
Xu, L. ., Kozlovskaya, V. ., Kharlampieva, E. ., Ankner, J. F. ., & Sukhishvili, S. A. . (2012). Anisotropic diffusion of polyelectrolyte chains within multilayer films. ACS Macro Letters, 1(1), 127–130. doi:10.1021/mz200075x
Xu, L. ., Pristinski, D. ., Zhuk, A. ., Stoddart, C. ., Ankner, J. F. ., & Sukhishvili, S. A. . (2012). Linear versus exponential growth of weak polyelectrolyte multilayers: Correlation with polyelectrolyte complexes. Macromolecules, 45(9), 3892–3901. doi:10.1021/ma300157p
Xu, W., & Choi, C.-H. (2012a). Effects of surface topography and colloid particles on the evaporation kinetics of sessile droplets on superhydrophobic surfaces. Journal of Heat Transfer, 134(5). doi:10.1115/1.4005715
Xu, W., & Choi, C.-H. (2012b). From sticky to slippery droplets: Dynamics of contact line depinning on superhydrophobic surfaces. Physical Review Letters, 109(2). doi:10.1103/PhysRevLett.109.024504
Zhu, Z. ., Senses, E. ., Akcora, P. ., & Sukhishvili, S. A. . (2012). Programmable light-controlled shape changes in layered polymer nanocomposites. ACS Nano, 6(4), 3152–3162. doi:10.1021/nn204938j
Chen, X. ., Yao, N. ., & Shi, Y. . (2011). Energy Harvesting Based on PZT Nanofibers. Green Energy and Technology, 33, 425–438. doi:10.1007/978-0-85729-638-2_12
Chen, X., & Shi, Y. (2011). Electrical determination of elastic modulus of individual PZT nanofibers by in situ SEM. In Proceedings of the ASME Design Engineering Technical Conference (Vol. 7, pp. 387–390). Washington, DC. doi:10.1115/DETC2011-47226
Du, K., Wathuthanthri, I., Mao, W., Xu, W., & Choi, C.-H. (2011). Large-area pattern transfer of metallic nanostructures on glass substrates via interference lithography. Nanotechnology, 22(28). doi:10.1088/0957-4484/22/28/285306
Erel, I., Zhu, Z., Zhuk, A., & Sukhishvili, S. A. (2011). Hydrogen-bonded layer-by-layer films of block copolymer micelles with pH-responsive cores. Journal of Colloid and Interface Science, 355(1), 61–69. doi:10.1016/j.jcis.2010.11.083
Ergun, A. ., Yu, X. ., Valdevit, A. ., Ritter, A. ., & Kalyon, D. M. . b b. (2011). In vitro analysis and mechanical properties of twin screw extruded single-layered and coextruded multilayered poly(caprolactone) scaffolds seeded with human fetal osteoblasts for bone tissue engineering. Journal of Biomedical Materials Research - Part A, 99 A(3), 354–366. doi:10.1002/jbm.a.33190
Gu, Y. ., Chen, X. ., Lee, J. H. ., Monteiro, D. ., Wang, H. ., & Lee, W. Y. . (2011). Inkjet-printed antibiotic- and calcium-eluting bioresorbable nanocomposite micropatterns for orthopaedic implants. European Cells and Materials, 21(SUPPL.2), 52. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84860803983&partnerID=40&md5=c220545d7fad2cd4b6003bfcc46d42f0
Han, M.-J., Hao, J., Xu, Z., & Meng, X. (2011). Surface-enhanced Raman scattering for arsenate detection on multilayer silver nanofilms. Analytica Chimica Acta, 692(1-2), 96–102. doi:10.1016/j.aca.2011.02.054
Han, Y., Lupitskyy, R., Chou, T.-M., Stafford, C. M., Du, H., & Sukhishvili, S. (2011). Effect of oxidation on surface-enhanced Raman scattering activity of silver nanoparticles: a quantitative correlation. Analytical Chemistry, 83(15), 5873–5880.
Hao, J. ., Han, M.-J. ., Xu, Z. ., Li, J. ., & Meng, X. . (2011). Fabrication and evolution of multilayer silver nanofilms for surface-enhanced Raman scattering sensing of arsenate. Nanoscale Research Letters, 6(1), X1–11. doi:10.1186/1556-276X-6-263
Ihnen, A. C., Petrock, A. M., Chou, T., Samuels, P. J., Fuchs, B. E., & Lee, W. Y. (2011). Crystal morphology variation in inkjet-printed organic materials. Applied Surface Science. doi:10.1016/j.apsusc.2011.08.125
Kenion, R. L., & Lee, W. Y. (2011). Inkjet-printed silver nanoparticle arrays for dental applications. In 2011 IEEE 37th Annual Northeast Bioengineering Conference, NEBEC 2011. Troy, NY. doi:10.1109/NEBC.2011.5778595
Kumar, K. ., Sul, O. ., Strauf, S. ., Choi, D. S. ., Fisher, F. ., Prasad, M. G. ., & Yang, E.-H. . (2011). A study on carbon-nanotube local oxidation lithography using an atomic force microscope. IEEE Transactions on Nanotechnology, 10(4), 849–854. doi:10.1109/TNANO.2010.2086474
Le, L. T. ., Ervin, M. H. ., Qiu, H. ., Fuchs, B. E. ., & Lee, W. Y. . (2011). Graphene supercapacitor electrodes fabricated by inkjet printing and thermal reduction of graphene oxide. Electrochemistry Communications, 13(4), 355–358. doi:10.1016/j.elecom.2011.01.023
Le, L. T. ., Ervin, M. H. ., Qiu, H. ., Fuchs, B. E. ., Zunino, J. ., & Lee, W. Y. . (2011). Inkjet-printed graphene for flexible micro-supercapacitors. In Proceedings of the IEEE Conference on Nanotechnology (pp. 67–71). Portland, OR. doi:10.1109/NANO.2011.6144432
Li, J. ., Chen, X. ., Ai, N. ., Hao, J. ., Chen, Q. ., Strauf, S. ., & Shi, Y. . (2011). Silver nanoparticle doped TiO2 nanofiber dye sensitized solar cells. Chemical Physics Letters, 514(1-3), 141–145. doi:10.1016/j.cplett.2011.08.048
Li, J., & Shi, Y. (2011). Electron transport and recombination in TiO2 nanofiber dye sensitized solar cell. In ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011 (Vol. 11, pp. 361–363). Denver, CO. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84869162899&partnerID=40&md5=f809df51dfb4e80104e7826a3f4e5441
Mao, W., Wathuthanthri, I., & Choi, C.-H. (2011a). Tunable two-mirror interference lithography system for wafer-scale nanopatterning. Optics Letters, 36(16), 3176–3178. doi:10.1364/OL.36.003176
Mao, W., Wathuthanthri, I., & Choi, C.-H. (2011b). Tunable two-mirror laser interference lithography system for large-area nano-patterning. In Proceedings of SPIE - The International Society for Optical Engineering (Vol. 7970). San Jose, CA. doi:10.1117/12.879576
Pinkhasova, P., Chou, T., Sukhishvili, S., & Du, H. (2011). Individually SERS-Active Hollow Ag-Au Nanoshells and Analyte-Dependent Enhancement Factors. In ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY (Vol. 242).
Qiu, H., Stepanov, V., Di Stasio, A. R., Chou, T., & Lee, W. Y. (2011). RDX-based nanocomposite microparticles for significantly reduced shock sensitivity. Journal of Hazardous Materials, 185(1), 489–493. doi:10.1016/j.jhazmat.2010.09.058
Traba, C., & Liang, J. F. (2011). Susceptibility of Staphylococcus aureus biofilms to reactive discharge gases. Biofouling, 27(7), 763–772. doi:10.1080/08927014.2011.602188
Wang, Y. ., Subbiahdoss, G. ., Swartjes, J. ., Van Der Mei, H. C. ., Busscher, H. J. ., & Libera, M. . (2011). Length-scale mediated differential adhesion of mammalian cells and microbes. Advanced Functional Materials, 21(20), 3916–3923. doi:10.1002/adfm.201100659
Wathuthanthri, I., Mao, W., & Choi, C.-H. (2011). Two degrees-of-freedom Lloyd-mirror interferometer for superior pattern coverage area. Optics Letters, 36(9), 1593–1595. doi:10.1364/OL.36.001593
Wu, Y. ., Zitelli, J. P. ., TenHuisen, K. S. ., Yu, X. ., & Libera, M. R. . (2011). Differential response of Staphylococci and osteoblasts to varying titanium surface roughness. Biomaterials, 32(4), 951–960. doi:10.1016/j.biomaterials.2010.10.001
Xu, L., Zhu, Z., & Sukhishvili, S. A. (2011). Polyelectrolyte multilayers of diblock copolymer micelles with temperature-responsive cores. Langmuir, 27(1), 409–415. doi:10.1021/la1038014
Xu, W., & Choi, C.-H. (2011). Experimental studies on evaporation kinetics and wetting dynamics of nanofluid droplets on superhydrophobic surfaces of micro-post patterns. Journal of Adhesion Science and Technology, 25(12), 1305–1321. doi:10.1163/016942411X555881
Xu, W., Leeladhar, R., Tsai, Y.-T., Yang, E.-H., & Choi, C.-H. (2011). Evaporative self-assembly of nanowires on superhydrophobic surfaces of nanotip latching structures. Applied Physics Letters, 98(7). doi:10.1063/1.3554360
Xu, Z. ., Hao, J. ., Braida, W. ., Strickland, D. ., Li, F. ., & Meng, X. . (2011). Surface-enhanced Raman scattering spectroscopy of explosive 2,4-dinitroanisole using modified silver nanoparticles. Langmuir, 27(22), 13773–13779. doi:10.1021/la202560t
Zerdoum, A. ., Crismaru, M. ., Loontjens, J. A. ., van der Mei, H. C. ., Busscher, H. J. ., & Libera, M. . (2011). Morphological effects of quaternary ammonium compounds on staphylococci. European Cells and Materials, 21(SUPPL.2), 81. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84860819707&partnerID=40&md5=64f43225e9f0a885d1874a660877c3ad
Zhang, X., Theuring, M., Song, Q., Mao, W., Begliarbekov, M., & Strauf, S. (2011). Holographic control of motive shape in plasmonic nanogap arrays. Nano Letters, 11(7), 2715–2719. doi:10.1021/nl200994k
Zhuk, A., Mirza, R., & Sukhishvili, S. (2011). Multiresponsive clay-containing layer-by-layer films. ACS Nano, 5(11), 8790–8799. doi:10.1021/nn202812a
Chen, X., Xu, S., & Shi, Y. (2010). Electro-mechanical coupling of piezoelectric nanocomposites. In Proceedings of the ASME Design Engineering Technical Conference (Vol. 4, pp. 409–412). Montreal, QC. doi:10.1115/DETC2010-29144
Gao, N. ., Wang, H. ., & Yang, E.-H. . (2010). An experimental study on ferromagnetic nickel nanowires functionalized with antibodies for cell separation. Nanotechnology, 21(10). doi:10.1088/0957-4484/21/10/105107
Han, Y. ., Oo, M. K. K. ., Sukhishvili, S. ., & Du, H. . (2010). Photonic crystal fiber as an optofluidic platform for surface-enhanced Raman scattering. In Proceedings of SPIE - The International Society for Optical Engineering (Vol. 7839). Oaxaca. doi:10.1117/12.869331
Han, Y., Tan, S., Oo, M. K. K., & Du, H. (2010). PCF with immobilized silver nanoparticles as an optofluidic SERS sensing platform. In Proceedings of SPIE - The International Society for Optical Engineering (Vol. 7677). Orlando, FL. doi:10.1117/12.848584
Hao, J. ., Xu, Z. ., Han, M.-J. ., Xu, S. ., & Meng, X. . (2010). Surface-enhanced Raman scattering analysis of perchlorate using silver nanofilms deposited on copper foils. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 366(1-3), 163–169. doi:10.1016/j.colsurfa.2010.06.010
Ihnen, A. ., Fuchs, B. ., Petrock, A. ., Samuels, P. ., Stepanov, V. ., Stasio, A. D. ., & Lee, W. . (2010). Inkjet printing of nanocomposite high-explosive materials. In Proceedings - 14th International Detonation Symposium, IDS 2010 (pp. 37–40). Coeur d’Alene, ID. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84883394711&partnerID=40&md5=6c2b977e68f534e1f81eb677f6a01a8c
Ihnen, A. C., Lee, J.-H., & Lee, W. Y. (2010). Effects of disordered hemispherical micropatterns on Staphylococcus epidermidis biofilm formation. Colloids and Surfaces B: Biointerfaces, 75(2), 601–607. doi:10.1016/j.colsurfb.2009.10.014
Ishan, W., & Choi, C.-H. (2010). Tunable lloyd-mirror interferometer for large-area nanopatterning. In ASME International Mechanical Engineering Congress and Exposition, Proceedings (Vol. 12, pp. 433–438). Lake Buena Vista, FL. doi:10.1115/IMECE2009-10895
Kumar, K. ., Sul, O. ., Tsai, Y.-T. ., Choi, D. ., Prasad, M. G. ., Fisher, F. ., … Yang, E. H. . (2010). Nanoscale graphene and carbon nanotube lithography using an atomic force microscope. In ASME International Mechanical Engineering Congress and Exposition, Proceedings (Vol. 12, pp. 417–418). Lake Buena Vista, FL. doi:10.1115/IMECE2009-10646
Kumar, K., & Yang, E. H. (2010). Nanoscale graphene lithography using an atomic force microscope. In Nanotechnology 2010: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational - Technical Proceedings of the 2010 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2010 (Vol. 2, pp. 199–201). Anaheim, CA. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-78049436942&partnerID=40&md5=d4419c3115e5325028c39e234c43991b
Lee, J.-H. ., Wang, H. ., Kaplan, J. B. ., & Lee, W. Y. . (2010). Effects of Staphylococcus epidermidis on osteoblast cell adhesion and viability on a Ti alloy surface in a microfluidic co-culture environment. Acta Biomaterialia, 6(11), 4422–4429. doi:10.1016/j.actbio.2010.05.021
Leeladhar, R., Xu, W., & Choi, C.-H. (2010). Evaporation of nanoparticles droplets on nanoporous superhydrophobic surfaces. In ASME International Mechanical Engineering Congress and Exposition, Proceedings (Vol. 12, pp. 619–625). Lake Buena Vista, FL. doi:10.1115/IMECE2009-10773
Li, D., Tumkor, S., Manoochehri, S., & Pochiraju, K. (2010). Fabrication of polymeric and polymeric nano-composite MEMS structures. In ASME International Mechanical Engineering Congress and Exposition, Proceedings (Vol. 12, pp. 309–313). Lake Buena Vista, FL. doi:10.1115/IMECE2009-12460
Li, J., Xu, S., & Shi, Y. (2010). Tich nanofibers based dye-sensitized solar cells. In ASME International Mechanical Engineering Congress and Exposition, Proceedings (Vol. 12, pp. 387–390). Lake Buena Vista, FL. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-77954294206&partnerID=40&md5=7c7ea4970caa4d8bb8e0961710401599
Libera, M. R. ., & Egerton, R. F. . (2010). Advances in the transmission electron microscopy of polymers. Polymer Reviews, 50(3), 321–339. doi:10.1080/15583724.2010.493256
Mago, G. ., Kalyon, D. M. ., & Fisher, F. T. . (2010). Processing-induced crystallization of semicrystalline polymer nanocomposites. In International SAMPE Symposium and Exhibition (Proceedings). Seattle, WA. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-78649490777&partnerID=40&md5=86728c0ed7e61e308388078a13933ff4
Manoocheri, K. ., & Du, E. . (2010). Development of a microfluidic mixer for lab-on-a-chip applications with active and passive actuations. In Proceedings of the ASME Design Engineering Technical Conference (Vol. 4, pp. 447–451). Montreal, QC. doi:10.1115/DETC2010-28894
Modi, S. H. . b, Dikovics, K. B. . b e, Gevgilili, H. ., Mago, G. ., Bartolucci, S. F. ., Fisher, F. T. ., & Kalyon, D. M. . b. (2010). Nanocomposites of poly(ether ether ketone) with carbon nanofibers: Effects of dispersion and thermo-oxidative degradation on development of linear viscoelasticity and crystallinity. Polymer, 51(22), 5236–5244. doi:10.1016/j.polymer.2010.08.060
Pavlukhina, S. ., Lu, Y. ., Patimetha, A. ., Libera, M. ., & Sukhishvili, S. . (2010). Polymer multilayers with pH-triggered release of antibacterial agents. Biomacromolecules, 11(12), 3448–3456. doi:10.1021/bm100975w
Sul, O., Jang, S., & Yang, E.-H. (2010). Characterization of thermomechanical properties of polypyrrole nanowires. In ASME International Mechanical Engineering Congress and Exposition, Proceedings (Vol. 12, pp. 301–302). Lake Buena Vista, FL. doi:10.1115/IMECE2009-12371
Sul, O., Tsai, C.-E., Gao, N., & Yang, E. H. (2010). Manipulation of low-dimensional nanomaterials using water meniscus. Nanoscience and Nanotechnology Letters, 2(2), 133–138. doi:10.1166/nnl.2010.1070
Tsai, Y.-T., Xu, W., Yang, E.-H., & Choi, C.-H. (2010). Self-assembly of nanowires at three-phase contact lines on superhydrophobic surfaces. Nanoscience and Nanotechnology Letters, 2(2), 150–156. doi:10.1166/nnl.2010.1073
Vural, S., Dikovics, K. B., & Kalyon, D. M. (2010). Cross-link density, viscoelasticity and swelling of hydrogels as affected by dispersion of multi-walled carbon nanotubes. Soft Matter, 6(16), 3870–3875. doi:10.1039/c0sm00099j
Xu, W., & Choi, C.-H. (2010a). Effects of structural topography on nanofluids droplet evaporation on multifarious superhydrophobic surfaces. In Proceedings of the ASME Micro/Nanoscale Heat and Mass Transfer International Conference 2009, MNHMT2009 (Vol. 1, pp. 497–505). Shanghai. doi:10.1115/MNHMT2009-18263
Xu, W., & Choi, C.-H. (2010b). Nanofluids evaporation kinetics on microstructured superhydrophobic surfaces. In ASME International Mechanical Engineering Congress and Exposition, Proceedings (Vol. 12, pp. 1015–1024). Lake Buena Vista, FL. doi:10.1115/IMECE2009-13067
Xu, W., Xu, S., Smiriglio, D., & Shi, Y. (2010). Fabrication and characterization of thermoelectric oxide la 1.xSrxCoO3 (x∼0.05) nanofibers. In ASME International Mechanical Engineering Congress and Exposition, Proceedings (Vol. 14, pp. 247–250). Lake Buena Vista, FL. doi:10.1115/IMECE2009-11849
Xu, Z. ., Hao, J. ., Li, F. ., & Meng, X. . (2010). Surface-enhanced Raman spectroscopy of arsenate and arsenite using Ag nanofilm prepared by modified mirror reaction. Journal of Colloid and Interface Science, 347(1), 90–95. doi:10.1016/j.jcis.2010.03.028
Yakovlev, S. ., Misra, M. ., Shi, S. ., Firlar, E. ., & Libera, M. . (2010). Quantitative nanoscale water mapping in frozen-hydrated skin by low-loss electron energy-loss spectroscopy. Ultramicroscopy, 110(7), 866–876. doi:10.1016/j.ultramic.2010.03.014
Bassim, N., De Gregorio, B., Kilcoyne, A. D., Scott, K., Chou, T., Wirick, S., … Stroud, R. (2009). Towards low-damage TEM sample preparation of carbonaceous materials in the focused ion beam. Microscopy and Microanalysis, 15(S2), 342–343.
Chen, X. ., Xu, S. ., Yao, N. ., Xu, W. ., & Shi, Y. . (2009). Potential measurement from a single lead zirconate titanate nanofiber using a nanomanipulator. Applied Physics Letters, 94(25). doi:10.1063/1.3157837
Krsko, P. ., Kaplan, J. B. ., & Libera, M. . (2009). Spatially controlled bacterial adhesion using surface-patterned poly(ethylene glycol) hydrogels. Acta Biomaterialia, 5(2), 589–596. doi:10.1016/j.actbio.2008.08.025
Krsko, P. ., McCann, T. E. ., Thach, T.-T. ., Laabs, T. L. ., Geller, H. M. ., & Libera, M. R. . (2009). Length-scale mediated adhesion and directed growth of neural cells by surface-patterned poly(ethylene glycol) hydrogels. Biomaterials, 30(5), 721–729. doi:10.1016/j.biomaterials.2008.10.011
Sengonul, M., Sousa, A., & Libera, M. (2009). Selective adsorption of surface-modified ferritin on a phase-separated polymer blend. Colloids and Surfaces B: Biointerfaces, 73(1), 152–155. doi:10.1016/j.colsurfb.2009.05.004
Sul, O., & Yang, E.-H. (2009). Development of a carbon nanotube-based nanoactuator for a nanoconveyer system. In ASME International Mechanical Engineering Congress and Exposition, Proceedings (Vol. 13, pp. 761–764). Boston, MA. doi:10.1115/IMECE2008-67526
Tsai, Y.-T., Xu, W., Yang, E.-H., & Choi, C.-H. (2009). Interfacial-tension-directed self-assembly of nanowires on superhydrophobic surfaces. In ASME International Mechanical Engineering Congress and Exposition, Proceedings (Vol. 13, pp. 749–753). Boston, MA. doi:10.1115/IMECE2008-67245
Xu, L. ., Zhu, Z. ., Borisov, O. V. ., Zhulina, E. B. ., & Sukhishvili, S. A. . (2009). PH-Triggered block copolymer micelle-to-micelle phase transition. Physical Review Letters, 103(11). doi:10.1103/PhysRevLett.103.118301
Xu, S. ., & Shi, Y. . (2009). High sensitivity, low operational temperature ITO nano gas sensor with integrated circuits. In 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2009 (pp. 690–693). Shenzhen. doi:10.1109/NEMS.2009.5068673
Xu, S., & Shi, Y. (2009a). Fabrication and characterization of nano-active fiber composites as acoustic emission sensors. Materials Evaluation, 67(10), 1189–1192. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-70350397842&partnerID=40&md5=a5ce68509bfba3a48ad00eb2878fb60e
Xu, S., & Shi, Y. (2009b). Low temperature high sensor response nano gas sensor using ITO nanofibers. Sensors and Actuators, B: Chemical, 143(1), 71–75. doi:10.1016/j.snb.2009.08.057
Yakovlev, S. ., Misra, M. ., Shi, S. ., & Libera, M. . (2009). Specimen thickness dependence of hydrogen evolution during cryo-transmission electron microscopy of hydrated soft materials. Journal of Microscopy, 236(3), 174–179. doi:10.1111/j.1365-2818.2009.03215.x
Zhu, Z., & Sukhishvili, S. A. (2009). Temperature-induced swelling and small molecule release with hydrogen- bonded multilayers of block copolymer micelles. ACS Nano, 3(11), 3595–3605. doi:10.1021/nn900655z
Zhuk, A., Pavlukhina, S., & Sukhishvili, S. A. (2009). Hydrogen-bonded layer-by-layer temperature-triggered release films. Langmuir, 25(24), 14025–14029. doi:10.1021/la901478v